| Both sides previous revisionPrevious revisionNext revision | Previous revision |
| can_physical_layer:can_transceivers [2023/01/27 12:46] – [Transceiver with active signal improvement SIC] added two TJA146x heinz | can_physical_layer:can_transceivers [2026/08/14 14:22] (current) – [Texas Instruments] heinz |
|---|
| [[ https://www.nxp.com/products/interfaces/can-transceivers/can-signal-improvement:CAN-FD#/| TJA146x]] series actively improve CAN signals to ensure robust communication in large networks and at faster bit rates. Pin-compatible replacements to conventional HS-CAN transceivers, and backward compatible, fulfilling the ISO 11898-2:2016 specification. The TJA146x series fully embody the CiA601-4 2.0.0 specification. | [[ https://www.nxp.com/products/interfaces/can-transceivers/can-signal-improvement:CAN-FD#/| TJA146x]] series actively improve CAN signals to ensure robust communication in large networks and at faster bit rates. Pin-compatible replacements to conventional HS-CAN transceivers, and backward compatible, fulfilling the ISO 11898-2:2016 specification. The TJA146x series fully embody the CiA601-4 2.0.0 specification. |
| |
| * [[https://www.nxp.com/products/interfaces/can-transceivers/can-signal-improvement/can-signal-improvement-capability-transceiver-with-standby-mode:TJA1462| TJA1462]] CAN transceiver with standby mode which is part of the TJA146x transceiver family that implements CAN signal improvement capability (SIC) as defined in CiA 601-4. | * [[https://www.nxp.com/products/interfaces/can-transceivers/can-signal-improvement/can-signal-improvement-capability-transceiver-with-standby-mode:TJA1462| TJA1462]] CAN transceiver with standby mode which is part of the TJA146x transceiver family that implements CAN signal improvement capability (SIC) as defined in CiA 601-4. |
| * [[https://www.nxp.com/products/interfaces/can-transceivers/can-signal-improvement/can-signal-improvement-capability-transceiver-with-sleep-mode:TJA1463 | TJA1463]] CAN transceiver with sleep mode which is part of the TJA146x transceiver family that implements CAN signal improvement capability (SIC) as defined in CiA 601-4. | * [[https://www.nxp.com/products/interfaces/can-transceivers/can-signal-improvement/can-signal-improvement-capability-transceiver-with-sleep-mode:TJA1463 | TJA1463]] CAN transceiver with sleep mode which is part of the TJA146x transceiver family that implements CAN signal improvement capability (SIC) as defined in CiA 601-4. |
| ==== TJA1041 ==== | ==== TJA1041 ==== |
| High-speed CAN transceiver with standby and sleep mode | High-speed CAN transceiver with standby and sleep mode |
| [[http://www.nxp.com/products/automotive/transceivers/can_transceivers/TJA1052IT.html | TJA1052i]] High-speed CAN transceiver that provides a galvanically isolated interface between a CAN protocol controller and the physical two-wire CAN bus. | [[http://www.nxp.com/products/automotive/transceivers/can_transceivers/TJA1052IT.html | TJA1052i]] High-speed CAN transceiver that provides a galvanically isolated interface between a CAN protocol controller and the physical two-wire CAN bus. |
| |
| | ==== TJA1051 ==== |
| | [[https://www.nxp.com/part/TJA1051T#/ | TJA1051T]] High-speed CAN transceiver. Fully ISO 11898-2:2003 compliant. Timing guaranteed for data rates up to 5 Mbit/s in the CAN FD fast phase\\ Adafruit offers a small board, [[https://www.adafruit.com/product/5708 | CAN Pal]], with the Transceiver and a 5V charge-pump voltage generator. No separate 5V power is required! |
| ==== Dual CAN Transceiver ==== | ==== Dual CAN Transceiver ==== |
| |
| |
| * [[http://www.ti.com/product/ISO1050 | ISO1050]] is a galvanically isolated CAN transceiver that meets the specifications of the ISO11898-2 standard. The device has the logic input and output buffers separated by a silicon oxide (SiO2) insulation barrier that provides galvanic isolation of up to 5000 VRMS for ISO1050DW and 2500 VRMS for ISO1050DUB | * [[http://www.ti.com/product/ISO1050 | ISO1050]] is a galvanically isolated CAN transceiver that meets the specifications of the ISO11898-2 standard. The device has the logic input and output buffers separated by a silicon oxide (SiO2) insulation barrier that provides galvanic isolation of up to 5000 VRMS for ISO1050DW and 2500 VRMS for ISO1050DUB |
| | |
| | **CAN XL:** \\ |
| | [[https://www.ti.com/product/TCAN6062 |TCAN6062]] **CAN XL** up to 20 Mbit/s, payload up to 2048 bytes per frame, support for CAN FD and CAN SIC, SIC for improving signal integrity, ringing reduction up to 80 percent according to TI, fault voltage protection up to ±58 V. |
| | |
| | German article: https://www.elektronikpraxis.de/can-xl-vom-klassischen-can-bus-zur-highspeed-kommunikation-a-cc8b512806dd685d195be7abb024e724/ |
| | |
| ---- | ---- |
| ===== Vishay Siliconix ===== | ===== Vishay Siliconix ===== |
