Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
can_physical_layer:can_transceivers [2023/01/27 12:49] – [Transceiver with active signal improvement SIC] heinzcan_physical_layer:can_transceivers [2026/08/14 14:22] (current) – [Texas Instruments] heinz
Line 180: Line 180:
 [[http://www.nxp.com/products/automotive/transceivers/can_transceivers/TJA1052IT.html | TJA1052i]] High-speed CAN transceiver that provides a galvanically isolated interface between a CAN protocol controller and the physical two-wire CAN bus.  [[http://www.nxp.com/products/automotive/transceivers/can_transceivers/TJA1052IT.html | TJA1052i]] High-speed CAN transceiver that provides a galvanically isolated interface between a CAN protocol controller and the physical two-wire CAN bus. 
  
 +==== TJA1051 ==== 
 +[[https://www.nxp.com/part/TJA1051T#/ | TJA1051T]] High-speed CAN transceiver. Fully ISO 11898-2:2003 compliant. Timing guaranteed for data rates up to 5 Mbit/s in the CAN FD fast phase\\ Adafruit offers a small board, [[https://www.adafruit.com/product/5708 | CAN Pal]],  with the Transceiver and a 5V charge-pump voltage generator. No separate 5V power is required!
 ==== Dual CAN Transceiver ==== ==== Dual CAN Transceiver ====
  
Line 256: Line 257:
  
   * [[http://www.ti.com/product/ISO1050 | ISO1050]] is a galvanically isolated CAN transceiver that meets the specifications of the ISO11898-2 standard. The device has the logic input and output buffers separated by a silicon oxide (SiO2) insulation barrier that provides galvanic isolation of up to 5000 VRMS for ISO1050DW and 2500 VRMS for ISO1050DUB   * [[http://www.ti.com/product/ISO1050 | ISO1050]] is a galvanically isolated CAN transceiver that meets the specifications of the ISO11898-2 standard. The device has the logic input and output buffers separated by a silicon oxide (SiO2) insulation barrier that provides galvanic isolation of up to 5000 VRMS for ISO1050DW and 2500 VRMS for ISO1050DUB
 +
 + **CAN XL:** \\ 
 +[[https://www.ti.com/product/TCAN6062 |TCAN6062]] **CAN XL** up to 20 Mbit/s, payload up to 2048 bytes per frame, support for CAN FD and CAN SIC, SIC for improving signal integrity, ringing reduction up to 80 percent according to TI, fault voltage protection up to ±58 V.
 +
 +German article: https://www.elektronikpraxis.de/can-xl-vom-klassischen-can-bus-zur-highspeed-kommunikation-a-cc8b512806dd685d195be7abb024e724/
 +
 ---- ----
 ===== Vishay Siliconix ===== ===== Vishay Siliconix =====

QR Code
QR Code can_physical_layer:can_transceivers (generated for current page)