Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

--- controllers:scaleo [2013/07/26 11:53] – [32 bit Controllers] heinz
+++ controllers:scaleo [2018/08/21 23:09] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
+====== Scaleo ======
 Try to put the latest devices on top of each section and mark end-of-line products. Only specify the main parameters of the micro controllers and go more into deep with details about the CAN interface. Always try to put a link to the data sheet or manual.
+[[ http://www.scaleochip.com | Scaleo chip]] company web site
 ===== SoC =====
@@ Line 15: / Line 21: @@
 easyCAN4-F1M-32  data sheet as [[http://www.scaleochip.com/images/Pdf/easyCAN4-F1M-32-BRF-200.pdf| easyCAN4-F1M-32-BRF-200.pdf]].
-The easyCAN4F is based on a ARMTDMI™ embedded processor. Scaleo chip offers AUTOSAR Micro-controller Abstraction Layer (MCAL) software conforming to the AUTOSAR R2.1 standard.
+The easyCAN4F is based on a ARMTDMI™ embedded processor. Scaleo chip offers AUTOSAR Micro-controller Abstraction Layer (MCAL) software conforming to the AUTOSAR R2.1 standard. 4 CAN channels, 32 message buffers each.\\ The controllers are named according the Number of CAN controllers: easyCAN1F == 1 CAN, easyCAN2F == 2 CAN, easyCAN4F == 4 CAN.

Trace: • j1939