can_higher_layer_protocols:energybus

Welcome to the CAN-bus Wiki project

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== EnergyBus ======


The EnergyBus standard is created by the EnergyBus e.V. - [[http://www.energybus.org|http://www.energybus.org]]


Partners are the CAN in Automation e.V. - [[http://www.can-cia.org|http://www.can-cia.org]]


and the emtas GmbH - [[http://www.emtas.de|http://www.emtas.de]]


The standard is composed in two parts. One part is the standardisation of hardware, e.g. connectors and the second part is the communication part.


The communication base on CANopen and is realized as CANopen application profile CiA 454.


===== Background =====


The EnergyBus standardization was started to create an interface between the components of the pedelecs. One of the main goals is to create an interface between the pedelec and the public charger stations. The current situation is, that there are public charger stations, but you require your own charger. But charger with a high charge current are weighty.


But now, the standard is very flexible, also the EnergyBus standard is creating for devices, like caravan, or self-sufficient systems.


===== Source code vendors =====


[[http://www.emtas.de/produkte/energybus-framework?lang=en|http://www.emtas.de/produkte/energybus-framework?lang=en]] - EnergyBus-Framework

Trace: • devicenet • kvaser • nmea2000 • gridconnect • canopen • xanbus • can_termination

Navigation

Search

Toolbox

QR Code