controllers:intel

Welcome to the CAN-bus Wiki project

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Intel ======

Try to put the latest devices on top of each section and mark end-of-line products. Only specify the main parameters of the micro controllers and go more into deep with details about the CAN interface. Always try to put a link to the data sheet or manual.

===== 8 bit Controllers =====

===== 16 bit Controllers =====

===== 32 bit Controllers =====

===== DSPs =====

===== Stand alone CAN Controllers =====

  * http://developer.intel.com/design/auto/can/archover/27241003.pdf Intel 82527; ARCHITECTURAL OVERVIEW, January 1996; 82527 Serial Communications Controller Architectural Overview Automotive
  * http://developer.intel.com/design/MCS96/CAN/27315001.PDF Intel 82527 Data Sheet; 82527 SERIAL COMMUNICATIONS CONTROLLER AREA NETWORK PROTOCOL Express Advance Information Datasheet


===== Platform Controller =====

The Intel Platform Controller Hub EG20T integrates a range of common I/O blocks required in many market segments such as industrial automation, retail, gaming, and digital signage. These include SATA, USB host and device, SD/SDIO/MMC, Gigabit Ethernet MAC as well as general embedded interfaces such as CAN, IEEE* 1588, SPI, I2C, UART and GPIO. The EG20T interfaces with the processor via a standard PCI Express* interface.\\ The CAN controller seemst to be the [[controllers:bosch| Bosch D_CAN]] module.

Trace: • freescale • can_transceivers • infineon • spansion • j1939 • microsemi • inicore • cansimulators

Navigation

Search

Toolbox

QR Code