controllers:scaleo

Welcome to the CAN-bus Wiki project

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Scaleo ======


Try to put the latest devices on top of each section and mark end-of-line products. Only specify the main parameters of the micro controllers and go more into deep with details about the CAN interface. Always try to put a link to the data sheet or manual.

[[ http://www.scaleochip.com | Scaleo chip]] company web site


===== SoC =====

 
===== FPGA ======

===== 8 bit Controllers =====


===== 16 bit Controllers =====


===== 32 bit Controllers =====

easyCAN4-F1M-32  data sheet as [[http://www.scaleochip.com/images/Pdf/easyCAN4-F1M-32-BRF-200.pdf| easyCAN4-F1M-32-BRF-200.pdf]].
The easyCAN4F is based on a ARMTDMI™ embedded processor. Scaleo chip offers AUTOSAR Micro-controller Abstraction Layer (MCAL) software conforming to the AUTOSAR R2.1 standard. 4 CAN channels, 32 message buffers each.\\ The controllers are named according the Number of CAN controllers: easyCAN1F == 1 CAN, easyCAN2F == 2 CAN, easyCAN4F == 4 CAN.



===== DSPs =====


===== Stand alone CAN Controllers =====

Trace: • hilscher • vscp • scaleo • certified_chips • allnet • nuvoton • can_hg • freescale • can_termination • inicore

Navigation

Search

Toolbox

QR Code