Try to put the latest devices on top of each section and mark end-of-line products. Only specify the main parameters of the micro controllers and go more into deep with details about the CAN interface. Always try to put a link to the data sheet or manual.

===== SoC =====

==== UltraScale+ ====
[[http://www.xilinx.com/products/silicon-devices/soc/zynq-ultrascale-mpsoc.html | Zynq UltraScale+ MPSoC]], ARM® Quad-Core Cortex®-A53 APU @ 1.2 GHz, ARM® Dual-Core Cortex®-R5 RPU @ 600 MHz, 2x CAN 

==== Zynq 7000 ====
[[http://www.xilinx.com/products/silicon-devices/soc/zynq-7000.html | Zynq-7000 All Programmable SoC]],  ARM core with 2 channel CAN and programmable logic extension, 2x CAN, the CAN controller is  a special XILINX product, sometimes called XCAN
 

===== FPGA ======

===== 8 bit Controllers =====


===== 16 bit Controllers =====


===== 32 bit Controllers =====


===== DSPs =====


===== Stand alone CAN Controllers =====