Ethernet/CAN
To be used as Ethernet to CAN, or RS232 to CAN or USB to CAN two standards are availabley
Analytica
Analytica
Analytica AnaGate CAN/Ethernet gateways for commercial and industrial use with 1, 2, 4 and 8 CAN interfaces (Linux based, extendable via GCC or scripting language
LUA).
-
Axotec
Axotec
MX4200 10/100 MBit Ethernet RJ45, up to 3 x CAN (3 pol.), USB 2.0 host/client, -40°C bis +85°C, Linux
OS
DX-3600 2 x 10/100 Ethernet, 2 x CAN (3pol.), 3G/UMTS, RS232, RS485, Digital-I/O 8 In/ 4 Out, 4 Analog-In, 1-Wire, DIN-Rail, ARM @400 Mhz, Linux
OS, Micro SD Card
Comp Mall
EMS Wünsche
EMS Wuensche Ethernet to CAN Interface or Gateway, ARM7 based, one CAN interface
EMS Wuensche Ethernet to CAN Interface or Gateway, 454 MHZ ARM9 CPU (Freescale I.MX287) based with two CAN Interfaces. SD Card slot and USB host interface.
EMS Wuensche Ethernet/CAN-Gateway for Mobile Applications, 6 CAN channels with SJA1000
ESD
ESD - Ether-CAN CAN over Ethernet
ICP Deutschland
IXXAT / HMS
IXXAT
CAN@net II: PC interfaces for CAN with common Windows driver
API. Can also be used as bridge between CAN systems or in generic version to access CAN systems via non Windows platforms.
JanzTec
JanzTec - Different embedded hardware for CAN/Ethernet connection. All emPC devices can operate Linux
emPC-A/RPI Embedded Controller based on Raspberry Pi 2 with industrial features, 1 X CAN, digital I/O
emPC-A/iMX6 ARM Freescale i.MX6 based embedded controller, 1 x 10/100/1000 MBit/s Ethernet, 2 x USB (v2.0), with 500 mA power supply capability up t0 4 x 9-pin D-SUB connectors for CAN
emPC-A500 ARM Freescale i.MX515 based embedded controller, 2 x 10/100 MBit/s Ethernet (RJ45 connectors), 2 x USB (v2.0), with 500 mA power supply capability, 2 x 9-pin D-SUB connectors for CAN or serial ports
emPC-CX+ CPU technology from Intel Atom up to Intel Core i7, fanless cooling, 2 x 10/100/1000 MBit/s Ethernet RJ45 connectors, 4 x USB host connection, USB 2.0 or USB 3.02, up to 2 x isolated CAN/CANopen ports using SJA1000 CAN Controller
emPC-CXR Embedded computing system for harsh and dusty environments, 2 x M12 8 pin X-coded connectors for 10/100/1000BaseT Ethernet, 2 x M12 5 pin connectors for CAN (SJA1000) or serial ports, 2 x M8 4 pin connectors for USB, -40 °C … +70 °C,
IP67
emPC-X x86 Intel Atom E38xx based embedded controller, 2 x 10/100/1000 MBit/s Ethernet, 3 x USB 2.0, 2 x 9-pin D-SUB connectors for CAN or serial ports
Microcontrol
Microcontrol
µMIC200 2 x Ethernet, 2 x CAN galv. isolated, USB, 2 x Seriell RS232, Real Time Linux, Cortex-A8 CPU TI AM 335 @ 1 GHz, -40°C .. + 85°C
Portwell
Portwell
PCS-8268 Intel Atom Processor E640T (1GHz) based Slim PC for Telematics, 1 x Ethernet RJ45, 1 x CAN, 2 x USB, COM1 RS-232 (Front side DSUB) & RS-422/485 (Rear side DSUB)
Data Sheet (PDF)
Protech USA
RM Michealides
PROEMION Telematic Systems aka Robert Michaelides.
CANview Ethernet rev 2301, 16bit controller, 1x 10/100 Mbit Ethernet M12 4-pin, 1 CAN galv. isolated. M12 5-pin, firmware extensions via C-Compiler
CANview Ethernet rev 2001, 16bit controller, 1x 10/100 Mbit Ethernet RJ45, 1 CAN DSUB-9, firmware extensions via C-Compiler
Sontheim
Sontheim
eSys-IDC4E1, 1x Ethernet, 10/100Mbit RJ45, 4 CAN channels DSUB-9 galv. isolated, CAN to CAN, CAN to Ethernet, Freescale Power PC @400
MHz, 0…60 °C
OS ??
Flyer
SSV
IGW/900 Linux Device Server with CAN (can4linux), µCLinux, -
discontinued
IGW963 1x 10/100 Mbps Ethernet RJ45, 1x CAN galv. isolated screw terminal, Linux, ARM9 MCU AT91SAM9263 @192 MH
Synertronixx
Synertronixx
CAN2Web Advanced 10/100MBit Ethernet RJ45, 1 x CAN DSUB-9 using SJA1000 galv. isolated, CAN termination activation via software , 2 x USB host, power 8..30V, ARM9 @200 Mhz, Linux
SYS TEC