DCD

Digital Core Design

Digital Core Design (DCD), founded in 1999, is a leading Intellectual Property (IP) Core provider and System-on-Chip (SoC) design house.

• DCAN FD is a standalone CAN controller. It conforms to Bosch CAN 2.0B specification (2.0B Active) and CAN FD (not ISO11898-1:2015 ?).
  The core has a simple CPU interface (8/16/32 bit configurable data width), with small or big endian addressing scheme. Hardware message filtering and 128 byte receive FIFO enable back-to-back message reception, with minimum CPU load. The DCAN FD is described at RTL level, allowing target use in FPGA or ASIC technologies.