Renesas
Try to put the latest devices on top of each section and mark end-of-line products. Only specify the main parameters of the micro controllers and go more into deep with details about the CAN interface. Always try to put a link to the data sheet or manual.
Renesas CAN/LIN microcontrollers online at http://www.renesas.com/ / http://www.renesas.eu/products/mpumcu/index.jsp
8 bit Controllers
R8C/Tiny
16 bit Controllers
RL78 family, is a combination of the 78K0R architecture family wit peripherals of the R8C family
32 bit Controllers
R-Car
Generation 2
R-Car H2
R-Car M2
R-Car E2
Generation 3
R-Car H3 2 x CAN/CANFD
R-Car M3
S7G2
32-bit ARM® Cortex®-M4 based microcontroller,
2-channel CAN compliant with ISO11898-1,
32 mailboxes/channel
S7G2 2 x CAN,
S3A7 1 x RCAN,
S124 1 x RCAN
RH family
One member of the RH family will be the first containing the new CAN FD module.
RH850/V1R-M 320-
MHz RISC MCU, 2-MiB flash, 2-MiB RAM, on-chip DSP core, 6 x CAN FD (the Renesas RS-CANFD complies with the ISO 11898-1:2016), developed for automotive radar ADAS solutions.
RH850/P1M low power consumption, up to 2
MB flash and up to 128 KB RAM, enhanced motor control timer, up to three RS-CAN interfaces, digital interface for sensor such as SENT and PSI5, safety functions such as lockstep CPU, ECC, BIST (Built-in Self Test) and ECM (Error Control Module), suitable for chassis systems.
RH850/P1H-C (R7F701372) 2 or 3 ch. M_CAN + 1 x MTTCAN
RX family
RX200 Low power 32 bit family, 32-bit RXv2 CPU core @54
MHz, 1.8 to 5.5V, incorporating functions for IEC60730 compliance, 32-bit single-precision floating point
RX230 family member with one CAN channel, Renesas RSCAN, 16 mbox
RX600 165 DMIPS @ 100Mhz, IEC60730 class B, up to three CAN channels, LQFP/LGA/BGA
RX631 Manual (pdf) Chapter 36. CAN Module (CAN)
in FIFO mode the controller implements a 5 stage RX and 5 stage TX FIFO.
Especially the introduced RX631 micro-controllers are designed to serve space-constrained applications in 48- and 64-pin packages.
RX64M operates iat 2.7 to 3.6 V with up to 120
MHz. Up to 4MB Flash with 120MHz Flash access & 512KB SRAM across range, 2ch Ethernet, 3ch CAN, 2ch USB (Host, OTG)
RX71M Family of 32-bit micro controllers. up to 240
MHz, up to 4
MB of on-chip flash memory, 552 SRAM, 3 ch CAN, Common functions: 12-bit A/D: 29 ch (8 ch x 1 unit + 21 ch x 1 unit), SCI, SCIF, I2C, RSPI, QSPI, SDHI, MMC, SSI (serial sound interface)
R-IN family
EC-1 R-IN based SoC is intended for high-speed, high-precision control of slave applications that require higher CPU performance such as intelligent I/O modules equipped with EtherCAT communication functions. The SoC also comes with one CAN channel.
R-IN32M3 Series (Renesas Industrial Networking Engine). ARM Cortex-M3 32-bit RISC CPU + HW-RTOS (Hardware Real-Time
OS) 100
MHz. 2 channels CAN. R-IN32M3-CL CC-Link
IE field controller and R-IN32M3-EC EtherCAT slave controller. Suited to be used as CAN to EtherCAT or CAN to CC-Link gateway.
Renesas
R-IN application site.
Each of the two CAN channels implements 64 message buffers.
R-IN32M3 Series User's Manual Peripheral Functions(PDF)
The
R-Car E1 is a new member of the R-Car series of automotive systems-on-chip (SoCs) offering low power consumption and high system integration targeting the cost-sensitive market of car navigation and multimedia systems including high end car radios. Two channel CAN Interface.
R-Car H1 SoC (system-on-chip) for next-generation high-end car infotainment systems that integrates a quad-core high-performance ARM® Cortex™-A9 processor (1
GHz) supporting versatile operating systems, one Renesas SH-4A high-reliability real-time processing CPU core, a high-performance graphics processor and two image recognition processing IPs, a dedicated audio processing digital signal processor (DSP), and a variety of many other peripheral functions. Two channel CAN Interface.
R-Car H2 SoC for car information systems. Besides high end graphic advanced automotive interfaces like Ethernet AVB, MOST-150 and 2 channel CAN and mass storage interfaces such as SATA, USB3.0/2.0, SDcard and PCI Express are supported. The R-Car H2 is powered by the ARM® Cortex™A-15 quad-core configuration running an additional ARM® Cortex™A-7 quad-core—the industry's first implementation of a Quad ARM® Cortex A15 and the big.LITTLE processing technique in an automotive SoC.
RZ family
The
RZ family of embedded processors retain the ease-of-use of Renesas microprocessors (MPUs) while combining Renesas proprietary technologies with the ARM® ecosystem ARM9 core @400Mhz. (RZ/A comes from RZ ARM®, Cortex -A9 based family.)
V850
V850E2/Fx4-L, @48 to 64 Mhz, 256KiB to 1.5MiB FLASH, AUTOSAR, 20 different chips, very low power, selective CAN wake-up
Manual (pdf)
DSPs
Stand alone CAN Controllers
Named CAN modules
HCAN
H8S/2646, H8S/2648, H8S/2649, H8S/2630, H8S/2639, H8S/2638, H8S/2636, H8S/2635, H8S/2628, H8S/2615 H8S/2612
H8S/2282
RCAN
RCAN2
The module can be found on the 8-Bit R8C/3x and R8C/Next. It features
RS-CAN
The module can be found on the Cortex-A9 based RZ family, and the RH family
RS-CANFD