This is an old revision of the document!
Table of Contents
Ethernet/CAN
Analytica
- Analytica AnaGate CAN X4 CAN/Ethernet gateways up to four CAN interfaces implemented in FPGA, SJA1000 like, ARM9 (32Bit, 400 MHz), Linux OS
EMS Wünsche
- EMS Wuensche Ethernet to CAN Interface or Gateway, ARM7 based, one CAN interface
- EMS Wuensche Ethernet to CAN Interface or Gateway, 454 MHZ ARM9 CPU (Freescale I.MX287) based with two CAN Interfaces. SD Card slot and USB host interface.
- EMS Wuensche Ethernet/CAN-Gateway for Mobile Applications, 6 CAN channels with SJA1000
ESD
- ESD - Ether-CAN CAN over Ethernet
IXXAT / HMS
- IXXAT CAN@net II: PC interfaces for CAN with common Windows driver API. Can also be used as bridge between CAN systems or in generic version to access CAN systems via non Windows platforms.
JanzTec
JanzTec - Different embedded hardware for CAN/Ethernet connection. All emPC devices can operate Linux
- emPC-A/RPI Embedded Controller based on Raspberry Pi 2 with industrial features, 1 X CAN, digital I/O
- emPC-A/iMX6 ARM Freescale i.MX6 based embedded controller, 1 x 10/100/1000 MBit/s Ethernet, 2 x USB (v2.0), with 500 mA power supply capability up t0 4 x 9-pin D-SUB connectors for CAN
- emPC-A500 ARM Freescale i.MX515 based embedded controller, 2 x 10/100 MBit/s Ethernet (RJ45 connectors), 2 x USB (v2.0), with 500 mA power supply capability, 2 x 9-pin D-SUB connectors for CAN or serial ports
- emPC-CX+ CPU technology from Intel Atom up to Intel Core i7, fanless cooling, 2 x 10/100/1000 MBit/s Ethernet RJ45 connectors, 4 x USB host connection, USB 2.0 or USB 3.02, up to 2 x isolated CAN/CANopen ports using SJA1000 CAN Controller
- emPC-CXR Embedded computing system for harsh and dusty environments, 2 x M12 8 pin X-coded connectors for 10/100/1000BaseT Ethernet, 2 x M12 5 pin connectors for CAN (SJA1000) or serial ports, 2 x M8 4 pin connectors for USB, -40 °C … +70 °C, IP67
- emPC-X x86 Intel Atom E38xx based embedded controller, 2 x 10/100/1000 MBit/s Ethernet, 3 x USB 2.0, 2 x 9-pin D-SUB connectors for CAN or serial ports
RM Michealides
PROEMION Telematic Systems aka Robert Michaelides.
- CANview Ethernet rev 2301, 16bit controller, 1x 10/100 Mbit Ethernet M12 4-pin, 1 CAN galv. isolated. M12 5-pin, firmware extensions via C-Compiler
- CANview Ethernet rev 2001, 16bit controller, 1x 10/100 Mbit Ethernet RJ45, 1 CAN DSUB-9, firmware extensions via C-Compiler
Sontheim
- eSys-IDC4E1, 1x Ethernet, 10/100Mbit RJ45, 4 CAN channels DSUB-9 galv. isolated, CAN to CAN, CAN to Ethernet, Freescale Power PC @400 MHz, 0…60 °C
OS ??
Flyer
SSV
- SSV IGW/900 Linux Device Server with CAN (can4linux)