Both sides previous revisionPrevious revisionNext revision | Previous revision |
can_physical_layer:can_repeaters [2017/12/22 18:26] – added many repeaters heinz | can_physical_layer:can_repeaters [2019/03/19 11:24] (current) – [CAN Repeater] IXXAT CR100/CR300 heinz |
---|
*[[ http://www.ems-wuensche.de/datasheets/html/crepn_e.htm | EMS CRep Opto ]] : CRepOpto is a galvanically isolating repeater for CAN networks. It is designed for railmount application within a control cabinet. CRepOpto provides the capability of error isolation. | *[[ http://www.ems-wuensche.de/datasheets/html/crepn_e.htm | EMS CRep Opto ]] : CRepOpto is a galvanically isolating repeater for CAN networks. It is designed for railmount application within a control cabinet. CRepOpto provides the capability of error isolation. |
| |
* [[ http://www.ixxat.com/index_en.html | IXXAT ]] | * [[ http://www.ixxat.com/index_en.html | IXXAT ]] |
| * [[ https://www.ixxat.com/de/produkte/industrie-produkte/repeater/can-cr100 | CR100]] CAN / CAN FD repeater with screw terminals; galvanic isolation of two segments of a CAN / CAN FD network; galvanic isolation :-) |
| * [[ https://www.ixxat.com/products/products-industrial/repeaters/can-cr300 | CR300]] CAN / CAN FD repeater with screw terminals and 4 channels; galvanic isolation :-) |
* [[ http://www.ixxat.com/can_repeater_en.html | CAN-Repeater]] : ISO 11898-2 CAN Repeater; can be equipped with a low-speed bus interface (ISO 11898-3), allowing the operation as high/low-speed converter. Its galvanic isolation isolates both CAN segments from each other as well as from the power supply. | * [[ http://www.ixxat.com/can_repeater_en.html | CAN-Repeater]] : ISO 11898-2 CAN Repeater; can be equipped with a low-speed bus interface (ISO 11898-3), allowing the operation as high/low-speed converter. Its galvanic isolation isolates both CAN segments from each other as well as from the power supply. |
* [[ http://www.ixxat.com/can_cr200_en.html | CAN-CR200]] Modular ISO 11898-2 CAN Repeater; Several CAN-CR200 can be connected to a CAN-hub via the integrated backbone bus; automatic recognition and separation of a defective segment from the rest of the network, after elimination of defect, segment is switched into the network again; galvanic isolation between CAN segments as well as power supply. | * [[ http://www.ixxat.com/can_cr200_en.html | CAN-CR200]] Modular ISO 11898-2 CAN Repeater; Several CAN-CR200 can be connected to a CAN-hub via the integrated backbone bus; automatic recognition and separation of a defective segment from the rest of the network, after elimination of defect, segment is switched into the network again; galvanic isolation between CAN segments as well as power supply. |