Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
can_physical_layer:can_transceivers [2023/01/27 12:49] – [Transceiver with active signal improvement SIC] heinzcan_physical_layer:can_transceivers [2023/03/23 17:09] (current) – [TJA1052i] added TJA1051 heinz
Line 180: Line 180:
 [[http://www.nxp.com/products/automotive/transceivers/can_transceivers/TJA1052IT.html | TJA1052i]] High-speed CAN transceiver that provides a galvanically isolated interface between a CAN protocol controller and the physical two-wire CAN bus.  [[http://www.nxp.com/products/automotive/transceivers/can_transceivers/TJA1052IT.html | TJA1052i]] High-speed CAN transceiver that provides a galvanically isolated interface between a CAN protocol controller and the physical two-wire CAN bus. 
  
 +==== TJA1051 ==== 
 +[[https://www.nxp.com/part/TJA1051T#/ | TJA1051T]] High-speed CAN transceiver. Fully ISO 11898-2:2003 compliant. Timing guaranteed for data rates up to 5 Mbit/s in the CAN FD fast phase\\ Adafruit offers a small board, [[https://www.adafruit.com/product/5708 | CAN Pal]],  with the Transceiver and a 5V charge-pump voltage generator. No separate 5V power is required!
 ==== Dual CAN Transceiver ==== ==== Dual CAN Transceiver ====
  

QR Code
QR Code can_physical_layer:can_transceivers (generated for current page)