Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

--- can_physical_layer:can_transceivers [2018/08/21 23:09] – external edit 127.0.0.1
+++ can_physical_layer:can_transceivers [2019/01/12 12:17] – [Dual CAN Transceiver] expl added heinz
@@ Line 17: / Line 17: @@
 ===== Analog Devices =====
-  * [[http://www.analog.com/en/search.html?q=ADM3053 | ADM3053]] Signal and Power Isolated CAN Transceiver with Integrated Isolated DC-to-DC Converter
+  * [[https://www.analog.com/en/products/adm3055e.html |ADM3055E]] new member of the [[http://www.analog.com/en/content/CU_over_iCoupler_Digital_Isolation/fca.html|iCoupler]] family of galvanic-isolated CAN transceivers, complies with ISO 111898-2:2016, bit rates up to 12 Mbit/s, low loop delays of 150 ns, ±40 V bus fault protection on CAN bus pins CAN-FD, :-)
   * [[http://www.analog.com/en/interface/can/adm3054/products/product.html|ADM3054]] Transceiver with galvanic isolation, 3 channel [[http://www.analog.com/en/content/CU_over_iCoupler_Digital_Isolation/fca.html|iCoupler]]. Logic Voltage supply is 3.3V  or 5V, bus voltage supply 5V. Isolation 5KV<sub>RMS</sub>. Max bit rate 1Mbit/s , temp range -40°C to +125°C. 16pin SOIC-W.\\ [[http://www.analog.com/static/imported-files/data_sheets/ADM3054.pdf| Data Sheet(pdf)]]
+  * [[http://www.analog.com/en/search.html?q=ADM3053 | ADM3053]] Signal and Power Isolated CAN Transceiver with Integrated Isolated DC-to-DC Converter
 ----
@@ Line 64: / Line 67: @@
 [[http://www.infineon.com/cms/en/product/transceiver/industrial-transceiver/channel.html?channel=db3a304320d39d590121f360c6630d59 | Industrial transceivers overview]]
 [[http://www.infineon.com/cms/en/product/transceiver/automotive-transceiver/automotive-can-transceivers/channel.html?channel=ff80808112ab681d0112ab69d0840321 | Automotive Transceivers overview]]
+Infineon [[https://www.infineon.com/cms/en/tools/solution-finder/product-finder/transceiver-finder/| Transceiver Finder]]
 For CAN High Speed applications (ISO11898-2, ISO11898-6), Infineon offers three transceivers
@@ Line 77: / Line 82: @@
 ==== System Basis Chip ====
+  * [[https://www.infineon.com/cms/de/product/automotive-system-ic/system-basis-chips-sbc/mid-range-sbc-family/tle9263-3bqx/ | TLE9263-3BQX]] designed for various CAN-LIN automotive applications as main supply for the microcontroller and as interface for a LIN and CAN bus network including the CAN Partial Networking feature, HS-CAN transceiver supporting CAN-FD up to 5 Mbps and CAN Partial Networking (incl. FD tolerant mode) ISO 11898-2:2016
   * TLE826x  with high speed CAN transceiver
   * TLE9267  with selective wake-up CAN transceiver. IC developed for door control units.
@@ Line 158: / Line 163: @@
 ==== Dual CAN Transceiver ====
-    * [[http://www.nxp.com/products/interface_and_connectivity/transceivers/can_transceivers/series/TJA1048.html|TJA1048T]] dual CAN transceivers based on the TJA1042, ISO11898-2 and ISO11898-5 compliant, for use in 12V and 24V systems. Transmit data dominant time-out function. SO14 and HVSON14 \\  [[http://www.nxp.com/documents/data_sheet/TJA1048.pdf| Data sheet]].
+-pin Dual-channel transceiver with low-power standby mode. Offers smaller board space in multi-channel CAN applications for data-rates up to 5 Mbit/s. Interfacing options for 3.3 V or 5 V supplied microcontrollers are available.
+  * [[ https://www.nxp.com/products/analog/interfaces/in-vehicle-network/can-transceiver-and-controllers/dual-high-speed-can-transceiver-with-standby-mode:TJA1046TK | TJA1046TK]] Dual high-speed CAN transceiver with Standby mode
+  * [[ https://www.nxp.com/products/analog/interfaces/in-vehicle-network/can-transceiver-and-controllers/dual high-speed-can-transceiver-with-standby-mode:TJA1059TK | TJA1059TK]] Dual high-speed CAN transceiver with Standby mode
+  * [[ http://www.nxp.com/products/interface_and_connectivity/transceivers/can_transceivers/series/TJA1048.html|TJA1048T]] dual CAN transceivers based on the TJA1042, ISO11898-2 and ISO11898-5 compliant, for use in 12V and 24V systems. Transmit data dominant time-out function. SO14 and HVSON14 \\  [[http://www.nxp.com/documents/data_sheet/TJA1048.pdf| Data sheet]].
 ==== ISO11898-6 ====
@@ Line 205: / Line 215: @@
 [[http://www.ti.com/lsds/ti/interface/can-products.page| parametric selection tool]] for CAN transceivers.
 Try also the [[http://www.ti.com/lsds/ti/interface/can-products.page?rst=beta | new one ]] in beta stage.
+[[http://www.ti.com/product/ISO1042 | ISO1042]] and [[http://www.ti.com/product/ISO1042-Q1 | ISO1042-Q1]] [[http://www.ti.com/lit/ds/symlink/iso1042-q1.pdf | PDF]] Isolated CAN Transceiver with 70-V Bus Fault protection and Flexible Data Rate :-)  Thwe Q1 is an automitive product
 [[http://www.ti.com/lsds/ti/interface/can-products.page | TCAN33x]] family is compatible with the ISO 11898 CAN physical layer standard. The TCAN330, TCAN332, TCAN334, and TCAN337 are specified for data rates up to 1 Mbit/s. For the TCAN330G, TCAN332G, TCAN334G, and TCAN337G devices, data rates up to 5 Mbit/s  (“G” suffix) are available.

Trace:

Differences

Navigation

Search

Toolbox

QR Code