Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision |
can_physical_layer:can_transceivers [2018/08/21 23:09] – external edit 127.0.0.1 | can_physical_layer:can_transceivers [2020/12/11 10:37] – Transceiver with active signal improvement heinz |
---|
| |
===== Analog Devices ===== | ===== Analog Devices ===== |
* [[http://www.analog.com/en/search.html?q=ADM3053 | ADM3053]] Signal and Power Isolated CAN Transceiver with Integrated Isolated DC-to-DC Converter | * [[https://www.analog.com/en/products/adm3055e.html |ADM3055E]] new member of the [[http://www.analog.com/en/content/CU_over_iCoupler_Digital_Isolation/fca.html|iCoupler]] family of galvanic-isolated CAN transceivers, complies with ISO 111898-2:2016, bit rates up to 12 Mbit/s, low loop delays of 150 ns, ±40 V bus fault protection on CAN bus pins CAN-FD, :-) |
* [[http://www.analog.com/en/interface/can/adm3054/products/product.html|ADM3054]] Transceiver with galvanic isolation, 3 channel [[http://www.analog.com/en/content/CU_over_iCoupler_Digital_Isolation/fca.html|iCoupler]]. Logic Voltage supply is 3.3V or 5V, bus voltage supply 5V. Isolation 5KV<sub>RMS</sub>. Max bit rate 1Mbit/s , temp range -40°C to +125°C. 16pin SOIC-W.\\ [[http://www.analog.com/static/imported-files/data_sheets/ADM3054.pdf| Data Sheet(pdf)]] | * [[http://www.analog.com/en/interface/can/adm3054/products/product.html|ADM3054]] Transceiver with galvanic isolation, 3 channel [[http://www.analog.com/en/content/CU_over_iCoupler_Digital_Isolation/fca.html|iCoupler]]. Logic Voltage supply is 3.3V or 5V, bus voltage supply 5V. Isolation 5KV<sub>RMS</sub>. Max bit rate 1Mbit/s , temp range -40°C to +125°C. 16pin SOIC-W.\\ [[http://www.analog.com/static/imported-files/data_sheets/ADM3054.pdf| Data Sheet(pdf)]] |
| |
| * [[http://www.analog.com/en/search.html?q=ADM3053 | ADM3053]] Signal and Power Isolated CAN Transceiver with Integrated Isolated DC-to-DC Converter |
| |
---- | ---- |
[[http://www.infineon.com/cms/en/product/transceiver/industrial-transceiver/channel.html?channel=db3a304320d39d590121f360c6630d59 | Industrial transceivers overview]] | [[http://www.infineon.com/cms/en/product/transceiver/industrial-transceiver/channel.html?channel=db3a304320d39d590121f360c6630d59 | Industrial transceivers overview]] |
[[http://www.infineon.com/cms/en/product/transceiver/automotive-transceiver/automotive-can-transceivers/channel.html?channel=ff80808112ab681d0112ab69d0840321 | Automotive Transceivers overview]] | [[http://www.infineon.com/cms/en/product/transceiver/automotive-transceiver/automotive-can-transceivers/channel.html?channel=ff80808112ab681d0112ab69d0840321 | Automotive Transceivers overview]] |
| |
| Infineon [[https://www.infineon.com/cms/en/tools/solution-finder/product-finder/transceiver-finder/| Transceiver Finder]] |
| |
For CAN High Speed applications (ISO11898-2, ISO11898-6), Infineon offers three transceivers | For CAN High Speed applications (ISO11898-2, ISO11898-6), Infineon offers three transceivers |
| |
==== System Basis Chip ==== | ==== System Basis Chip ==== |
| * [[https://www.infineon.com/cms/de/product/automotive-system-ic/system-basis-chips-sbc/mid-range-sbc-family/tle9263-3bqx/ | TLE9263-3BQX]] designed for various CAN-LIN automotive applications as main supply for the microcontroller and as interface for a LIN and CAN bus network including the CAN Partial Networking feature, HS-CAN transceiver supporting CAN-FD up to 5 Mbps and CAN Partial Networking (incl. FD tolerant mode) ISO 11898-2:2016 |
* TLE826x with high speed CAN transceiver | * TLE826x with high speed CAN transceiver |
* TLE9267 with selective wake-up CAN transceiver. IC developed for door control units. | * TLE9267 with selective wake-up CAN transceiver. IC developed for door control units. |
| |
===== Microchip ===== | ===== Microchip ===== |
| * [[https://www.microchip.com/wwwproducts/en/ATA6570 | ATA6570]] High-speed CAN FD Transceiver with Partial Networking, provides local and enhanced remote wake-up capabilities. Very low power consumption in Standby and Sleep Mode. Beside local wake-up via WAKE and remote wake-up pattern according to ISO 11898-2:2016 and also additionally supports ISO11898-2:2016 compliant CAN partial networking. Configuration the SPI. It also features a watchdog, a Serial Peripheral Interface (SPI) and automatic adjustment of the I/O levels to the I/O level of the connected microcontroller via the VIO pin. ATA6570 is a CAN-FD device but can be easily configured via the SPI as Non-FD for Classical CAN, CAN FD silent, CAN FD passive or as CAN FD active device, in order to fulfill the corresponding application requirements. :-) |
* [[ http://www.microchip.com/wwwproducts/en/MCP2542FD | MCP2542FD/4FD]] CAN FD Transceiver with Wake-Up on CAN activity, Optimized for CAN FD at 2, 5 and 8 Mbps Operation, Maximum propagation delay 120 ns, Loop delay symmetry -10%/+10% (2 Mbps), ([[http://ww1.microchip.com/downloads/en/DeviceDoc/20005514A.pdf| PDF]]) :-) | * [[ http://www.microchip.com/wwwproducts/en/MCP2542FD | MCP2542FD/4FD]] CAN FD Transceiver with Wake-Up on CAN activity, Optimized for CAN FD at 2, 5 and 8 Mbps Operation, Maximum propagation delay 120 ns, Loop delay symmetry -10%/+10% (2 Mbps), ([[http://ww1.microchip.com/downloads/en/DeviceDoc/20005514A.pdf| PDF]]) :-) |
* [[ http://www.microchip.com/wwwproducts/en/MCP2542FD | MCP2542WFD/4WFD]] CAN FD Transceiver with Wake-Up Pattern (WUP) Option, Optimized for CAN FD at 2, 5 and 8 Mbps Operation, Maximum propagation delay 120 ns, Loop delay symmetry -10%/+10% (2 Mbps), Wake-up on Pattern (WUP) as specified in ISO11898-2:2015, 3.6 μs activity filter time. [[http://ww1.microchip.com/downloads/en/DeviceDoc/20005514A.pdf| PDF]]) :-) | * [[ http://www.microchip.com/wwwproducts/en/MCP2542FD | MCP2542WFD/4WFD]] CAN FD Transceiver with Wake-Up Pattern (WUP) Option, Optimized for CAN FD at 2, 5 and 8 Mbps Operation, Maximum propagation delay 120 ns, Loop delay symmetry -10%/+10% (2 Mbps), Wake-up on Pattern (WUP) as specified in ISO11898-2:2015, 3.6 μs activity filter time. [[http://ww1.microchip.com/downloads/en/DeviceDoc/20005514A.pdf| PDF]]) :-) |
| |
[[http://www.nxp.com/products/interface-and-connectivity/wired-connectivity/can-lin-flexray-transceivers/can-transceivers:MC_53485 | Overview]] | [[http://www.nxp.com/products/interface-and-connectivity/wired-connectivity/can-lin-flexray-transceivers/can-transceivers:MC_53485 | Overview]] |
| |
| |
| |
| |
| ==== Secure CAN Transceivers ==== |
| CAN/CAN FD transceiver family TJA115x provides a seamless and very efficient solution to secure classical CAN and CAN FD communication without using cryptography. |
| * [[ https://www.nxp.com/docs/en/fact-sheet/SECURCANTRLFUS.pdf | TJA115x]] fact sheet (PDF) |
| |
| ==== Transceiver with active signal improvement ==== |
| |
| Read more on [[ https://www.nxp.com/docs/en/white-paper/CANSIGIMP-WP.pdf | CAN Signal Improvement]] (PDF). |
| |
| |
| [[ https://www.nxp.com/products/interfaces/can-transceivers/can-signal-improvement:CAN-FD#/| TJA146x]] series actively improve CAN signals to ensure robust communication in large networks and at faster bit rates. Pin-compatible replacements to conventional HS-CAN transceivers, and backward compatible, fulfilling the ISO 11898-2:2016 specification. The TJA146 series fully embody the CiA601-4 2.0.0 specification. |
==== TJA1041 ==== | ==== TJA1041 ==== |
High-speed CAN transceiver with standby and sleep mode | High-speed CAN transceiver with standby and sleep mode |
| |
==== Dual CAN Transceiver ==== | ==== Dual CAN Transceiver ==== |
* [[http://www.nxp.com/products/interface_and_connectivity/transceivers/can_transceivers/series/TJA1048.html|TJA1048T]] dual CAN transceivers based on the TJA1042, ISO11898-2 and ISO11898-5 compliant, for use in 12V and 24V systems. Transmit data dominant time-out function. SO14 and HVSON14 \\ [[http://www.nxp.com/documents/data_sheet/TJA1048.pdf| Data sheet]]. | |
| 14-pin Dual-channel transceiver with low-power standby mode. Offers smaller board space in multi-channel CAN applications for data-rates up to 5 Mbit/s. Interfacing options for 3.3 V or 5 V supplied microcontrollers are available. |
| |
| * [[ https://www.nxp.com/products/analog/interfaces/in-vehicle-network/can-transceiver-and-controllers/dual-high-speed-can-transceiver-with-standby-mode:TJA1046TK | TJA1046TK]] Dual high-speed CAN transceiver with Standby mode |
| * [[ https://www.nxp.com/products/analog/interfaces/in-vehicle-network/can-transceiver-and-controllers/dual high-speed-can-transceiver-with-standby-mode:TJA1059TK | TJA1059TK]] Dual high-speed CAN transceiver with Standby mode |
| * [[ http://www.nxp.com/products/interface_and_connectivity/transceivers/can_transceivers/series/TJA1048.html|TJA1048T]] dual CAN transceivers based on the TJA1042, ISO11898-2 and ISO11898-5 compliant, for use in 12V and 24V systems. Transmit data dominant time-out function. SO14 and HVSON14 \\ [[http://www.nxp.com/documents/data_sheet/TJA1048.pdf| Data sheet]]. |
| |
==== ISO11898-6 ==== | ==== ISO11898-6 ==== |
[[http://www.ti.com/lsds/ti/interface/can-products.page| parametric selection tool]] for CAN transceivers. | [[http://www.ti.com/lsds/ti/interface/can-products.page| parametric selection tool]] for CAN transceivers. |
Try also the [[http://www.ti.com/lsds/ti/interface/can-products.page?rst=beta | new one ]] in beta stage. | Try also the [[http://www.ti.com/lsds/ti/interface/can-products.page?rst=beta | new one ]] in beta stage. |
| |
| [[http://www.ti.com/product/ISO1042 | ISO1042]] and [[http://www.ti.com/product/ISO1042-Q1 | ISO1042-Q1]] [[http://www.ti.com/lit/ds/symlink/iso1042-q1.pdf | PDF]] Isolated CAN Transceiver with 70-V Bus Fault protection and Flexible Data Rate :-) Thwe Q1 is an automitive product |
| |
[[http://www.ti.com/lsds/ti/interface/can-products.page | TCAN33x]] family is compatible with the ISO 11898 CAN physical layer standard. The TCAN330, TCAN332, TCAN334, and TCAN337 are specified for data rates up to 1 Mbit/s. For the TCAN330G, TCAN332G, TCAN334G, and TCAN337G devices, data rates up to 5 Mbit/s (“G” suffix) are available. | [[http://www.ti.com/lsds/ti/interface/can-products.page | TCAN33x]] family is compatible with the ISO 11898 CAN physical layer standard. The TCAN330, TCAN332, TCAN334, and TCAN337 are specified for data rates up to 1 Mbit/s. For the TCAN330G, TCAN332G, TCAN334G, and TCAN337G devices, data rates up to 5 Mbit/s (“G” suffix) are available. |