Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
can_physical_layer:can_transceivers [2018/11/26 16:02]
heinz [Analog Devices]
can_physical_layer:can_transceivers [2019/01/12 12:17]
heinz [Dual CAN Transceiver] expl added
Line 163: Line 163:
  
 ==== Dual CAN Transceiver ==== ==== Dual CAN Transceiver ====
-    ​* [[http://​www.nxp.com/​products/​interface_and_connectivity/​transceivers/​can_transceivers/​series/​TJA1048.html|TJA1048T]] dual CAN transceivers based on the TJA1042, ISO11898-2 and ISO11898-5 compliant, for use in 12V and 24V systems. Transmit data dominant time-out function. SO14 and HVSON14 \\  [[http://​www.nxp.com/​documents/​data_sheet/​TJA1048.pdf| Data sheet]].+ 
 +14-pin Dual-channel transceiver with low-power standby mode. Offers smaller board space in multi-channel CAN applications for data-rates up to 5 Mbit/s. Interfacing options for 3.3 V or 5 V supplied microcontrollers are available. 
 + 
 +  * [[ https://​www.nxp.com/​products/​analog/​interfaces/​in-vehicle-network/​can-transceiver-and-controllers/​dual-high-speed-can-transceiver-with-standby-mode:​TJA1046TK | TJA1046TK]] Dual high-speed CAN transceiver with Standby mode 
 +  * [[ https://​www.nxp.com/​products/​analog/​interfaces/​in-vehicle-network/​can-transceiver-and-controllers/​dual high-speed-can-transceiver-with-standby-mode:​TJA1059TK | TJA1059TK]] Dual high-speed CAN transceiver with Standby mode 
 +  ​* [[ http://​www.nxp.com/​products/​interface_and_connectivity/​transceivers/​can_transceivers/​series/​TJA1048.html|TJA1048T]] dual CAN transceivers based on the TJA1042, ISO11898-2 and ISO11898-5 compliant, for use in 12V and 24V systems. Transmit data dominant time-out function. SO14 and HVSON14 \\  [[http://​www.nxp.com/​documents/​data_sheet/​TJA1048.pdf| Data sheet]].
  
 ==== ISO11898-6 ==== ==== ISO11898-6 ====

QR Code
QR Code can_physical_layer:can_transceivers (generated for current page)