| Both sides previous revisionPrevious revision | Next revisionBoth sides next revision |
| can_physical_layer:can_transceivers [2020/12/11 10:37] – Transceiver with active signal improvement heinz | can_physical_layer:can_transceivers [2023/01/27 12:44] – added SIC heinz |
|---|
| |
| Manufacturers working on CAN FD capable transceivers are marked with a CAN FD smily :-) | Manufacturers working on CAN FD capable transceivers are marked with a CAN FD smily :-) |
| The main issue of CAN FD capable transceivers is the symmetry of the rising and the falling edges, which are required above 1 Mbit/s. | The main issue of CAN FD capable transceivers is the symmetry of the rising and the falling edges, which are required above 1 Mbit/s. CAN FD enhances the exchange of data up to 5 Mbit/s by using high-speed (HS) CAN transceivers. But its achievable data rate is not likely to exceed 2 Mbit/s in real topologies because of the effects of signal ringing. CAN SIC transceivers actively improve the signal and thus are less limited by ringing, achieving higher bit rates in more complex topologies. |
| | |
| | |
| | |
| ---- | ---- |
| ===== Application Notes and White Papers ===== | ===== Application Notes and White Papers ===== |
| |
| [[http://www.nxp.com/products/interface-and-connectivity/wired-connectivity/can-lin-flexray-transceivers/can-transceivers:MC_53485 | Overview]] | [[http://www.nxp.com/products/interface-and-connectivity/wired-connectivity/can-lin-flexray-transceivers/can-transceivers:MC_53485 | Overview]] |
| |
| |
| |
| |
| * [[ https://www.nxp.com/docs/en/fact-sheet/SECURCANTRLFUS.pdf | TJA115x]] fact sheet (PDF) | * [[ https://www.nxp.com/docs/en/fact-sheet/SECURCANTRLFUS.pdf | TJA115x]] fact sheet (PDF) |
| |
| ==== Transceiver with active signal improvement ==== | ==== Transceiver with active signal improvement SIC ==== |
| | CAN SIC transsceivers actively improve CAN signals to ensure robust communication in large networks and at faster bit rates. |
| | [[https://www.nxp.com/docs/en/white-paper/CANSIGIMP-WP.pdf | CAN Signal Improvement]] (NXP PDF). |
| |
| Read more on [[ https://www.nxp.com/docs/en/white-paper/CANSIGIMP-WP.pdf | CAN Signal Improvement]] (PDF). | [[ https://www.nxp.com/products/interfaces/can-transceivers/can-signal-improvement:CAN-FD#/| TJA146x]] series actively improve CAN signals to ensure robust communication in large networks and at faster bit rates. Pin-compatible replacements to conventional HS-CAN transceivers, and backward compatible, fulfilling the ISO 11898-2:2016 specification. The TJA146x series fully embody the CiA601-4 2.0.0 specification. |
| |
| |
| [[ https://www.nxp.com/products/interfaces/can-transceivers/can-signal-improvement:CAN-FD#/| TJA146x]] series actively improve CAN signals to ensure robust communication in large networks and at faster bit rates. Pin-compatible replacements to conventional HS-CAN transceivers, and backward compatible, fulfilling the ISO 11898-2:2016 specification. The TJA146 series fully embody the CiA601-4 2.0.0 specification. | |
| ==== TJA1041 ==== | ==== TJA1041 ==== |
| High-speed CAN transceiver with standby and sleep mode | High-speed CAN transceiver with standby and sleep mode |
