Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
can_physical_layer:can_transceivers [2016/03/29 18:32]
heinz [Texas Instruments] added the new parts TCAN33x and TCAN1042x
can_physical_layer:can_transceivers [2019/01/12 12:21] (current)
heinz [TJA1041] new chapter Secure CAN Transceivers
Line 17: Line 17:
  
 ===== Analog Devices ===== ===== Analog Devices =====
 +  * [[https://​www.analog.com/​en/​products/​adm3055e.html |ADM3055E]] new member of the [[http://​www.analog.com/​en/​content/​CU_over_iCoupler_Digital_Isolation/​fca.html|iCoupler]] family of galvanic-isolated CAN transceivers,​ complies with ISO 111898-2:​2016,​ bit rates up to 12 Mbit/s, low loop delays of 150 ns, ±40 V bus fault protection on CAN bus pins CAN-FD, :-)
  
-[[http://​www.analog.com/​en/​interface/​can/​adm3054/​products/​product.html|ADM3054]] Transceiver with galvanic isolation, 3 channel [[http://​www.analog.com/​en/​content/​CU_over_iCoupler_Digital_Isolation/​fca.html|iCoupler]]. Logic Voltage supply is 3.3V  or 5V, bus voltage supply 5V. Isolation 5KV<​sub>​RMS</​sub>​. Max bit rate 1Mbit/s , temp range -40°C to +125°C. 16pin SOIC-W.\\ [[http://​www.analog.com/​static/​imported-files/​data_sheets/​ADM3054.pdf| Data Sheet(pdf)]]+  * [[http://​www.analog.com/​en/​interface/​can/​adm3054/​products/​product.html|ADM3054]] Transceiver with galvanic isolation, 3 channel [[http://​www.analog.com/​en/​content/​CU_over_iCoupler_Digital_Isolation/​fca.html|iCoupler]]. Logic Voltage supply is 3.3V  or 5V, bus voltage supply 5V. Isolation 5KV<​sub>​RMS</​sub>​. Max bit rate 1Mbit/s , temp range -40°C to +125°C. 16pin SOIC-W.\\ [[http://​www.analog.com/​static/​imported-files/​data_sheets/​ADM3054.pdf| Data Sheet(pdf)]] 
 + 
 +  * [[http://​www.analog.com/​en/​search.html?​q=ADM3053 | ADM3053]] Signal and Power Isolated CAN Transceiver with Integrated Isolated DC-to-DC Converter
  
 ---- ----
Line 64: Line 67:
 [[http://​www.infineon.com/​cms/​en/​product/​transceiver/​industrial-transceiver/​channel.html?​channel=db3a304320d39d590121f360c6630d59 | Industrial transceivers overview]] [[http://​www.infineon.com/​cms/​en/​product/​transceiver/​industrial-transceiver/​channel.html?​channel=db3a304320d39d590121f360c6630d59 | Industrial transceivers overview]]
 [[http://​www.infineon.com/​cms/​en/​product/​transceiver/​automotive-transceiver/​automotive-can-transceivers/​channel.html?​channel=ff80808112ab681d0112ab69d0840321 | Automotive Transceivers overview]] [[http://​www.infineon.com/​cms/​en/​product/​transceiver/​automotive-transceiver/​automotive-can-transceivers/​channel.html?​channel=ff80808112ab681d0112ab69d0840321 | Automotive Transceivers overview]]
 +
 +Infineon [[https://​www.infineon.com/​cms/​en/​tools/​solution-finder/​product-finder/​transceiver-finder/​| Transceiver Finder]]
  
 For CAN High Speed applications (ISO11898-2,​ ISO11898-6),​ Infineon offers three transceivers ​ For CAN High Speed applications (ISO11898-2,​ ISO11898-6),​ Infineon offers three transceivers ​
Line 77: Line 82:
  
 ==== System Basis Chip ==== ==== System Basis Chip ====
 +  * [[https://​www.infineon.com/​cms/​de/​product/​automotive-system-ic/​system-basis-chips-sbc/​mid-range-sbc-family/​tle9263-3bqx/​ | TLE9263-3BQX]] designed for various CAN-LIN automotive applications as main supply for the microcontroller and as interface for a LIN and CAN bus network including the CAN Partial Networking feature, HS-CAN transceiver supporting CAN-FD up to 5 Mbps and CAN Partial Networking (incl. FD tolerant mode) ISO 11898-2:​2016
   * TLE826x ​ with high speed CAN transceiver   * TLE826x ​ with high speed CAN transceiver
   * TLE9267 ​ with selective wake-up CAN transceiver. IC developed for door control units.   * TLE9267 ​ with selective wake-up CAN transceiver. IC developed for door control units.
Line 98: Line 103:
  
 ---- ----
 +
 +===== Maxim =====
 +The MAX14878–MAX14880 family of high-speed transceivers improve communication and safety by integrating galvanic isolation between the CAN protocol controller side of the device and the physical wires of the CAN bus network. All transceivers operate up to the maximum high-speed CAN data rate of 1Mbps. Input common-mode range is ±25V, wide 1.71V to 5.5V supply voltage range, 40°C to +125°C,
 +  * [[https://​www.maximintegrated.com/​en/​products/​interface/​transceivers/​MAX148788.html | MAX14878]] ​ up to 5000VRMS (60s) of galvanic isolation.
 +  * [[https://​www.maximintegrated.com/​en/​products/​interface/​transceivers/​MAX148789.html | MAX14879]] provides up to 2750VRMS (60s) of galvanic isolation,
 +  * [[https://​www.maximintegrated.com/​en/​products/​interface/​transceivers/​MAX14880.html ​ | MAX14880]] up to 5000VRMS (60s) of galvanic isolation. ​
 +
  
 ===== Microchip ===== ===== Microchip =====
-  * [[http://​www.microchip.com/​wwwproducts/​Devices.aspx?​dDocName=en010405 ​MCP2551]] High Speed 11898-2 CAN Transceiver ​(1st generation ​Not recommended ​for new designs+  * [[ http://​www.microchip.com/​wwwproducts/​en/​MCP2542FD ​MCP2542FD/​4FD]] CAN FD Transceiver with Wake-Up on CAN activity, ​ Optimized for CAN FD at 2, 5 and 8 Mbps Operation, Maximum propagation delay 120 ns, Loop delay symmetry -10%/+10% (2 Mbps), ([[http://​ww1.microchip.com/​downloads/​en/​DeviceDoc/​20005514A.pdf| PDF]]) :-) 
 +  * [[ http://​www.microchip.com/​wwwproducts/​en/​MCP2542FD | MCP2542WFD/​4WFD]] ​CAN FD Transceiver ​with Wake-Up Pattern (WUP) Option, Optimized ​for CAN FD at 2, 5 and 8 Mbps Operation, Maximum propagation delay 120 ns, Loop delay symmetry -10%/+10% (2 Mbps), Wake-up on Pattern (WUP) as specified in ISO11898-2:​2015,​ 3.6 μs activity filter time. [[http://​ww1.microchip.com/​downloads/​en/​DeviceDoc/​20005514A.pdf| PDF]]) :-)
   * [[ http://​www.microchip.com/​wwwproducts/​Devices.aspx?​dDocName=en561070 | MCP2561/2]] High-Speed CAN transceivers ISO-11898-5,​ low standby current consumption (<5 µA typical). VDD= 4.5V to 5.5V. Both meet CAN specification requirement “GIFT ICT Group Conformance Test Specification V1.0”\\ :-) Microchip claims that its MCP2561/2FD transceivers are suitable for data-rates up to 8 Mbit/s. The maximum propagation delay is 120 ns and the loop-delay symmetry is ±10 % for bit-rates up to 2 Mbit/s.   * [[ http://​www.microchip.com/​wwwproducts/​Devices.aspx?​dDocName=en561070 | MCP2561/2]] High-Speed CAN transceivers ISO-11898-5,​ low standby current consumption (<5 µA typical). VDD= 4.5V to 5.5V. Both meet CAN specification requirement “GIFT ICT Group Conformance Test Specification V1.0”\\ :-) Microchip claims that its MCP2561/2FD transceivers are suitable for data-rates up to 8 Mbit/s. The maximum propagation delay is 120 ns and the loop-delay symmetry is ±10 % for bit-rates up to 2 Mbit/s.
     *  MCP2561 SPLIT pin to stabilize common mode in biased split termination schemes.     *  MCP2561 SPLIT pin to stabilize common mode in biased split termination schemes.
     *  MCP2562 VIO Supply Pin to Interface directly to 1.8V to 5.5V I/O, internal level shifter on digital I/O pins.     *  MCP2562 VIO Supply Pin to Interface directly to 1.8V to 5.5V I/O, internal level shifter on digital I/O pins.
 +  * [[http://​www.microchip.com/​wwwproducts/​Devices.aspx?​dDocName=en010405 | MCP2551]] High Speed 11898-2 CAN Transceiver (1st generation - Not recommended for new designs) ​
  
 ---- ----
 +
 +===== MORNSUN =====
 +[[http://​www.mornsun-power.com/​ | MORNSUN]]
 +  * TD301MCAN and TD501MCAN, transceiver modules with integrated power isolation, signal isolation, CAN transceiver and bus protection in one module. 2500-VDC electric isolation, DIP8 package, operating temperature is -40 °C to +105 °C;  TD501MCAN with data transmission rate to 5 Mbit/s
  
 ===== NVE Non Volatile Electronics ===== ===== NVE Non Volatile Electronics =====
Line 115: Line 132:
 :-) :-)
  
-[[http://​www.nxp.com/​products/​interface_and_connectivity/​transceivers/​can_transceivers/ ​| Overview]]+[[http://​www.nxp.com/​products/​interface-and-connectivity/wired-connectivity/​can-lin-flexray-transceivers/​can-transceivers:​MC_53485 ​| Overview]] 
 +==== Secure CAN Transceivers ==== 
 +CAN/CAN FD transceiver family TJA115x provides a seamless and very efficient solution to secure classical CAN and CAN FD communication without using cryptography. 
 +  * [[ https://​www.nxp.com/​docs/​en/​fact-sheet/​SECURCANTRLFUS.pdf | TJA115x]] fact sheet (PDF) 
 + 
 + 
 +==== TJA1041 ==== 
 +High-speed CAN transceiver with standby and sleep mode 
 +  * [[http://​cache.nxp.com/​documents/​data_sheet/​TJA1041.pdf | Data Sheet]] 
 +  * [[http://​cache.nxp.com/​documents/​application_note/​AN00094.pdf | TJA1041/​1041A]] high speed CAN transceiver,​ Application Note AN00094
  
 ==== TJA1052i ==== ==== TJA1052i ====
Line 142: Line 168:
  
 ==== Dual CAN Transceiver ==== ==== Dual CAN Transceiver ====
-    ​* [[http://​www.nxp.com/​products/​interface_and_connectivity/​transceivers/​can_transceivers/​series/​TJA1048.html|TJA1048T]] dual CAN transceivers based on the TJA1042, ISO11898-2 and ISO11898-5 compliant, for use in 12V and 24V systems. Transmit data dominant time-out function. SO14 and HVSON14 \\  [[http://​www.nxp.com/​documents/​data_sheet/​TJA1048.pdf| Data sheet]].+ 
 +14-pin Dual-channel transceiver with low-power standby mode. Offers smaller board space in multi-channel CAN applications for data-rates up to 5 Mbit/s. Interfacing options for 3.3 V or 5 V supplied microcontrollers are available. 
 + 
 +  * [[ https://​www.nxp.com/​products/​analog/​interfaces/​in-vehicle-network/​can-transceiver-and-controllers/​dual-high-speed-can-transceiver-with-standby-mode:​TJA1046TK | TJA1046TK]] Dual high-speed CAN transceiver with Standby mode 
 +  * [[ https://​www.nxp.com/​products/​analog/​interfaces/​in-vehicle-network/​can-transceiver-and-controllers/​dual high-speed-can-transceiver-with-standby-mode:​TJA1059TK | TJA1059TK]] Dual high-speed CAN transceiver with Standby mode 
 +  ​* [[ http://​www.nxp.com/​products/​interface_and_connectivity/​transceivers/​can_transceivers/​series/​TJA1048.html|TJA1048T]] dual CAN transceivers based on the TJA1042, ISO11898-2 and ISO11898-5 compliant, for use in 12V and 24V systems. Transmit data dominant time-out function. SO14 and HVSON14 \\  [[http://​www.nxp.com/​documents/​data_sheet/​TJA1048.pdf| Data sheet]].
  
 ==== ISO11898-6 ==== ==== ISO11898-6 ====
Line 178: Line 209:
 ===== Texas Instruments ​ ===== ===== Texas Instruments ​ =====
 :-) :-)
 +
 +[[http://​www.ti.com/​lsds/​ti/​interface/​can-technical-documents.page | Technical documents for CAN Transceivers]] ​
 +  * Overview of 3.3V CAN (Controller Area Network) Transceivers
 +  * Q1 2009 Issue Analog Applications Journal
 +  * CAN EVM User's Guide
 +  * CAN Reference Guide
 +  * [[http://​www.ti.com/​lit/​pdf/​slly020 | Simplify CAN bus implementations with chokeless transceivers]]
  
 TI offers a very sophisticated parametric selection tool TI offers a very sophisticated parametric selection tool
 [[http://​www.ti.com/​lsds/​ti/​interface/​can-products.page| parametric selection tool]] for CAN transceivers. [[http://​www.ti.com/​lsds/​ti/​interface/​can-products.page| parametric selection tool]] for CAN transceivers.
 Try also the [[http://​www.ti.com/​lsds/​ti/​interface/​can-products.page?​rst=beta | new one ]] in beta stage. Try also the [[http://​www.ti.com/​lsds/​ti/​interface/​can-products.page?​rst=beta | new one ]] in beta stage.
 +
 +[[http://​www.ti.com/​product/​ISO1042 | ISO1042]] and [[http://​www.ti.com/​product/​ISO1042-Q1 | ISO1042-Q1]] [[http://​www.ti.com/​lit/​ds/​symlink/​iso1042-q1.pdf | PDF]] Isolated CAN Transceiver with 70-V Bus Fault protection and Flexible Data Rate :-)  Thwe Q1 is an automitive product
  
 [[http://​www.ti.com/​lsds/​ti/​interface/​can-products.page | TCAN33x]] family is compatible with the ISO 11898 CAN physical layer standard. The TCAN330, TCAN332, TCAN334, and TCAN337 are specified for data rates up to 1 Mbit/s. For the TCAN330G, TCAN332G, TCAN334G, and TCAN337G devices, data rates up to 5 Mbit/​s ​ (“G” suffix) are available. [[http://​www.ti.com/​lsds/​ti/​interface/​can-products.page | TCAN33x]] family is compatible with the ISO 11898 CAN physical layer standard. The TCAN330, TCAN332, TCAN334, and TCAN337 are specified for data rates up to 1 Mbit/s. For the TCAN330G, TCAN332G, TCAN334G, and TCAN337G devices, data rates up to 5 Mbit/​s ​ (“G” suffix) are available.
  
-[[http://​www.ti.com/​lsds/​ti/​interface/​can-products.page ​| TCAN1042x]] for use in CAN FD networks up to 2 Mbit/s. With the “G” suffix up to 5 Mbit/s. Low power standby mode with remote wake request feature.+[[http://​www.ti.com/​tcan1042-pr-eu | TCAN1042x]] for use in CAN FD networks up to 2 Mbit/s. With the “G” suffix up to 5 Mbit/s. Low power standby mode with remote wake request feature
 + 
 +[[http://​www.ti.com/​tcan1051-pr-eu | TCAN1051]] for use in CAN FD networks up to 2 Mbit/s. With the “G” suffix up to 5 Mbit/s.  
 + 
 +http://​www.electronics-eetimes.com/​news/​can-fd-transceivers-offer-high-emc-performance-short-loop-delay/​page/​0/​1 
 +http://​www.ti.com/​tcan1042-pr-eu and http://​www.ti.com/​tcan1051-pr-eu.
  
 CAN transceiver with fast loop times ( < 150 ns) for highly loaded CAN networks ​ CAN transceiver with fast loop times ( < 150 ns) for highly loaded CAN networks ​
Line 201: Line 246:
  
 [[http://​www.vishay.com|Vishay Siliconix]] Si9200EY CAN Bus Driver and Receiver.\\ ​ [[http://​www.vishay.com/​docs/​70015/​si9200.pdf | Data Sheet]] \\ [[http://​www.vishay.com/​docs/​70573/​70573.pdf | AN602 application note]] [[http://​www.vishay.com|Vishay Siliconix]] Si9200EY CAN Bus Driver and Receiver.\\ ​ [[http://​www.vishay.com/​docs/​70015/​si9200.pdf | Data Sheet]] \\ [[http://​www.vishay.com/​docs/​70573/​70573.pdf | AN602 application note]]
 +
 +===== Yamar =====
 +
 +  * [[http://​yamar.com/​product/​dcan500/​ | DCAN500]] transceiver enables a physical transmission of CAN messages on the DC power supply lines. Up to 500Kbit/s. Bits are QPSK modulated on the DC line and coupled to the DC line by means of capacitors.\\ [[https://​can-newsletter.org/​hardware/​semiconductors/​170413_can-over-powerline_dcan500_yamar/​=cwt17-15&​utm_medium=cwt-mail&​utm_campaign=weekly-telegraph-17-15 | CAN Newsletter Online]]
  

QR Code
QR Code can_physical_layer:can_transceivers (generated for current page)