Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
can_physical_layer:can_transceivers [2019/01/12 12:21]
heinz [TJA1041] new chapter Secure CAN Transceivers
can_physical_layer:can_transceivers [2020/12/11 10:37] (current)
heinz Transceiver with active signal improvement
Line 112: Line 112:
  
 ===== Microchip ===== ===== Microchip =====
 +  * [[https://www.microchip.com/wwwproducts/en/ATA6570 | ATA6570]] High-speed CAN FD Transceiver with Partial Networking, provides local and enhanced remote wake-up capabilities. Very low power consumption in Standby and Sleep Mode. Beside local wake-up via WAKE and remote wake-up pattern according to ISO 11898-2:2016 and also additionally supports ISO11898-2:2016 compliant CAN partial networking. Configuration the SPI. It also features a watchdog, a Serial Peripheral Interface (SPI) and automatic adjustment of the I/O levels to the I/O level of the connected microcontroller via the VIO pin. ATA6570 is a CAN-FD device but can be easily configured via the SPI as Non-FD for Classical CAN, CAN FD silent, CAN FD passive or as CAN FD active device, in order to fulfill the corresponding application requirements. :-)
   * [[ http://www.microchip.com/wwwproducts/en/MCP2542FD | MCP2542FD/4FD]] CAN FD Transceiver with Wake-Up on CAN activity,  Optimized for CAN FD at 2, 5 and 8 Mbps Operation, Maximum propagation delay 120 ns, Loop delay symmetry -10%/+10% (2 Mbps), ([[http://ww1.microchip.com/downloads/en/DeviceDoc/20005514A.pdf| PDF]]) :-)   * [[ http://www.microchip.com/wwwproducts/en/MCP2542FD | MCP2542FD/4FD]] CAN FD Transceiver with Wake-Up on CAN activity,  Optimized for CAN FD at 2, 5 and 8 Mbps Operation, Maximum propagation delay 120 ns, Loop delay symmetry -10%/+10% (2 Mbps), ([[http://ww1.microchip.com/downloads/en/DeviceDoc/20005514A.pdf| PDF]]) :-)
   * [[ http://www.microchip.com/wwwproducts/en/MCP2542FD | MCP2542WFD/4WFD]] CAN FD Transceiver with Wake-Up Pattern (WUP) Option, Optimized for CAN FD at 2, 5 and 8 Mbps Operation, Maximum propagation delay 120 ns, Loop delay symmetry -10%/+10% (2 Mbps), Wake-up on Pattern (WUP) as specified in ISO11898-2:2015, 3.6 μs activity filter time. [[http://ww1.microchip.com/downloads/en/DeviceDoc/20005514A.pdf| PDF]]) :-)   * [[ http://www.microchip.com/wwwproducts/en/MCP2542FD | MCP2542WFD/4WFD]] CAN FD Transceiver with Wake-Up Pattern (WUP) Option, Optimized for CAN FD at 2, 5 and 8 Mbps Operation, Maximum propagation delay 120 ns, Loop delay symmetry -10%/+10% (2 Mbps), Wake-up on Pattern (WUP) as specified in ISO11898-2:2015, 3.6 μs activity filter time. [[http://ww1.microchip.com/downloads/en/DeviceDoc/20005514A.pdf| PDF]]) :-)
Line 133: Line 134:
  
 [[http://www.nxp.com/products/interface-and-connectivity/wired-connectivity/can-lin-flexray-transceivers/can-transceivers:MC_53485 | Overview]] [[http://www.nxp.com/products/interface-and-connectivity/wired-connectivity/can-lin-flexray-transceivers/can-transceivers:MC_53485 | Overview]]
 +
 +
 +
 +
 ==== Secure CAN Transceivers ==== ==== Secure CAN Transceivers ====
 CAN/CAN FD transceiver family TJA115x provides a seamless and very efficient solution to secure classical CAN and CAN FD communication without using cryptography. CAN/CAN FD transceiver family TJA115x provides a seamless and very efficient solution to secure classical CAN and CAN FD communication without using cryptography.
   * [[ https://www.nxp.com/docs/en/fact-sheet/SECURCANTRLFUS.pdf | TJA115x]] fact sheet (PDF)   * [[ https://www.nxp.com/docs/en/fact-sheet/SECURCANTRLFUS.pdf | TJA115x]] fact sheet (PDF)
 +
 +==== Transceiver with active signal improvement ====
 +
 +Read more on [[  https://www.nxp.com/docs/en/white-paper/CANSIGIMP-WP.pdf | CAN Signal Improvement]] (PDF). 
  
  
 +[[ https://www.nxp.com/products/interfaces/can-transceivers/can-signal-improvement:CAN-FD#/| TJA146x]] series actively improve CAN signals to ensure robust communication in large networks and at faster bit rates. Pin-compatible replacements to conventional HS-CAN transceivers, and backward compatible, fulfilling the ISO 11898-2:2016 specification. The TJA146 series fully embody the CiA601-4 2.0.0 specification.
 ==== TJA1041 ==== ==== TJA1041 ====
 High-speed CAN transceiver with standby and sleep mode High-speed CAN transceiver with standby and sleep mode

QR Code
QR Code can_physical_layer:can_transceivers (generated for current page)