Both sides previous revisionPrevious revisionNext revision | Previous revision |
controllers:atmel [2015/01/16 22:00] – [Atmel] heinz | controllers:atmel [2018/08/21 23:09] (current) – external edit 127.0.0.1 |
---|
====== Atmel ====== | ====== Atmel ====== |
[[http://www.atmel.com/| ATMEL]] | [[http://www.atmel.com/| ATMEL]] |
| |
| --- // 2015/12/22 16:15// rumour that ATMEL will be sold, [[http://www.dialog-semiconductor.com/ | Dialog Semiconductor]] or [[http://www.microchip.com | Microchip]] |
| |
| |
Try to put the latest devices on top of each section and mark end-of-line products. Only specify the main parameters of the micro controllers and go more into deep with details about the CAN interface. Always try to put a link to the data sheet or manual. | Try to put the latest devices on top of each section and mark end-of-line products. Only specify the main parameters of the micro controllers and go more into deep with details about the CAN interface. Always try to put a link to the data sheet or manual. |
| |
===== 32 bit Controllers ===== | ===== 32 bit Controllers ===== |
| * [[http://www.atmel.com/products/microcontrollers/arm/sama5.aspx#SAMA5D2_series | SAMA5D2]] ARM Cortex-A5 SoC @500MHz down to 166MHz,extended -40 to 105°C, two CAN FD [[controllers:c_can|BOSCH M_CAN]] :-), USB HSIC support, ARM NEON™, floating point, free Linux distribution available at [[http://www.at91.com/linux4sam/bin/view/Linux4SAM/Sama5d2XplainedMainPage | Linux4sam.com]], |
* [[http://www.atmel.com/products/microcontrollers/arm/sam3a.aspx | SAM3A]] ARM Cortex-M3 micro-controllers with two CAN channels, Ethernet and USB. [[http://www.atmel.com/Images/doc11057.pdf | SAM3X/SAM3A Series Complete]] PDF manual. | * [[ http://www.atmel.com/devices/ATSAMA5D41.aspx |SAMA5D4]] ARM Cortex-A5 microprocessor @528 MHz, ARM NEON™ SIMD engine for accelerated signal processing. **No** CAN. |
| |
* [[http://www.atmel.com/products/microcontrollers/ARM/SAM4E.aspx | SAM4E]] ARM Cortex-M4 micro-controllers @ 120Mhz with two CAN channels, Ethernet and USB, two independent 16-bit ADC. Interesting is an offer for the free download of the "Studio 6 IDP" (integrated development platform). ATSAM4E-EK evaluation kit. [[http://www.atmel.com/Images/Atmel_11157_32-bit-Cortex-M4-Microcontroller_SAM4E_Datasheet.pdf | SAM4E Series Complete]] PDF manual. | |
* [[ http://www.atmel.com/products/microcontrollers/arm/sama5d3.aspx| SAMA5D3]] ARM Cortex-A5 microprocessor @536 MHz 850-DMIPS. Two CAN on-chip modules. Atmel Linux distributions at [[http://linux4sam.com| linux4sam.com]] | * [[ http://www.atmel.com/products/microcontrollers/arm/sama5d3.aspx| SAMA5D3]] ARM Cortex-A5 microprocessor @536 MHz 850-DMIPS. Two CAN on-chip modules. Atmel Linux distributions at [[http://linux4sam.com| linux4sam.com]] |
| * [[http://www.atmel.com/products/microcontrollers/ARM/SAM4E.aspx | SAM4E]] ARM Cortex-M4 micro-controllers @ 120Mhz with two CAN channels, Ethernet and USB, two independent 16-bit ADC. Interesting is an offer for the free download of the "Studio 6 IDP" (integrated development platform). ATSAM4E-EK evaluation kit. [[http://www.atmel.com/Images/Atmel_11157_32-bit-Cortex-M4-Microcontroller_SAM4E_Datasheet.pdf | SAM4E Series Complete]] PDF manual. |
| * [[http://www.atmel.com/products/microcontrollers/arm/sam3a.aspx | SAM3A]] ARM Cortex-M3 micro-controllers with two CAN channels, Ethernet and USB. [[http://www.atmel.com/Images/doc11057.pdf | SAM3X/SAM3A Series Complete]] PDF manual. |
| * Cortex-M7-based MCU [[http://atmelcorporation.wordpress.com/2014/10/02/atmel-samples-new-family-of-atmel-smart-arm-cortex-m7-based-mcus/ | announcement ]] October 2014, the part should have 2 CAN FD channels :-) :-) |
| * [[http://www.atmel.com/products/microcontrollers/arm/sam-v-mcus.aspx| SAM-V70]] Cortex-M7 @300MHz, up to 1 MiB FLASH and 384 KiB Multiport SRAM, two CAN FD, |
| * [[ http://www.atmel.com/products/microcontrollers/arm/sam-e.aspx| SAM E70]] Cortex-M7 @300-MHz, up to 2 MiB FLASH, Ethernet with MI/RMII, USB High Speed with on-chip PHY, dual BOSCH CAN FD |
| * CAN FD with up to 64 Data Bytes Supported |
| * BOSCH MCAN implementation |
| * Up to 64 Dedicated Receive Buffers |
| * Up to 32 Dedicated Transmit Buffers |
| * e.g. [[http://www.atmel.com/Images/Atmel-11296-32-bit-Cortex-M7-Microcontroller-SAM-E70_Datasheet.pdf| E70 data sheet]].1782 pages, chapter 45. //Controller Area Network (M_CAN)// |
* Cortex-M7 family, SAM E70, SAM S70, SAM V71 and SAM V71. The SAM E70 series adds a 10/100 Ethernet MAC and dual CAN-FD :-) interface. The SAM V70 and V71 series support Ethernet AVB and Media LB. | * Cortex-M7 family, SAM E70, SAM S70, SAM V71 and SAM V71. The SAM E70 series adds a 10/100 Ethernet MAC and dual CAN-FD :-) interface. The SAM V70 and V71 series support Ethernet AVB and Media LB. |
* [[http://www.atmel.com/products/microcontrollers/arm/sam-s.aspx| SMART SAM S]] Series | * [[http://www.atmel.com/products/microcontrollers/arm/sam-s.aspx| SMART SAM S]] Series |
* [[http://www.atmel.com/products/microcontrollers/arm/sam-e.aspx | SMART SAM E]] Series | * [[http://www.atmel.com/products/microcontrollers/arm/sam-e.aspx | SMART SAM E]] Series |
* [[http://www.atmel.com/products/automotive/automotive_microcontrollers/smart-arm-based-automotive-mcus.aspx | SMART SAM V]] Series: | * [[http://www.atmel.com/products/automotive/automotive_microcontrollers/smart-arm-based-automotive-mcus.aspx | SMART SAM V]] Series: |
| |
* [[ http://www.atmel.com/devices/ATSAMA5D41.aspx |SAMA5D4]] ARM Cortex-A5 microprocessor @528 MHz, ARM NEON™ SIMD engine for accelerated signal processing. **No** CAN. | |
* [[http://www.atmel.com/devices/sam9263.aspx?tab=overview | AT91SAM9263]] ARM926-based microprocessor running @240MHz. Networking peripherals include USB host and device interfaces, a 10/100 Ethernet MAC and one CAN channel. There are also four USARTs, two SPIs, CompactFlash, SD/SDIO/MMC interface and a TWI. The controller runs Linux. | * [[http://www.atmel.com/devices/sam9263.aspx?tab=overview | AT91SAM9263]] ARM926-based microprocessor running @240MHz. Networking peripherals include USB host and device interfaces, a 10/100 Ethernet MAC and one CAN channel. There are also four USARTs, two SPIs, CompactFlash, SD/SDIO/MMC interface and a TWI. The controller runs Linux. |
* Cortex-M7-based MCU [[http://atmelcorporation.wordpress.com/2014/10/02/atmel-samples-new-family-of-atmel-smart-arm-cortex-m7-based-mcus/ | announcement ]] October 2014, the part should have 2 CAN FD channels :-) :-) | |
* Not sure if it is the part announced in October 2014\\ [[ http://www.atmel.com/products/microcontrollers/arm/sam-e.aspx| SAM E70]] Vortex-M7 @300-MHz, up to 2 MiB FLASH, Ethernet with MI/RMII, USB High Speed with on-chip PHY, dual BOSCH CAN FD | |
* CAN FD with up to 64 Data Bytes Supported | |
* BOSC MCAN implementation | |
* Up to 64 Dedicated Receive Buffers | |
* Up to 32 Dedicated Transmit Buffers | |
* e.g. [[http://www.atmel.com/Images/Atmel-11296-32-bit-Cortex-M7-Microcontroller-SAM-E70_Datasheet.pdf| E70 data sheet]].1782 pages, chapter 45. //Controller Area Network (MCAN)// | |
===== DSPs ===== | ===== DSPs ===== |
| |
===== Stand alone CAN Controllers ===== | ===== Stand alone CAN Controllers ===== |
| |