Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

controllers:c_can [2015/08/09 11:40]
heinz [C_CAN / D_CAN / M_CAN] altera links corrected
controllers:c_can [2018/08/21 23:09]
Line 1: Line 1:
- 
-==== C_CAN / D_CAN / M_CAN ==== 
- 
-C_CAN is an CAN implementation developed by [[http://www.can.bosch.com | Bosch]] and sold as Intellectual Property IP to other chip manufactureres. [[http://www.bosch-semiconductors.de/en/ubk_semiconductors/safe/in_vehicle_communication/can_controllers/can_controllers.html | CAN products]]. 
- 
-Known chips using it: 
- 
-  * ARM (in general) Bosch GmbH? offers the C_CAN module to be integrated via the AMBA(tm) APB interface protocol bus to an ARM processor. 
-  * Altera: Bosch C_CAN intellectual property (IP) module can be implemented on the Altera(r) Stratix(tm), Cyclone(tm), and APEX(tm) 20KE FPGA families. [[https://www.altera.com/solutions/partners/ip-partners/bosch.html | Bosch parner profile ]]. 
-  * Fujitsu (now Spansion) 8FX/16LX/16FX/32FX, Spansion FCR4 
-  * Hynix ARM HMS30C7202 
-  * Nuvoton NUC130/NUC140 
-  * OKI stand alone CAN controller ML67Q2301 
-  * SiLabs? C8051F040, C8051F500 
-  * ST STR911  
- 
-A new module design, the D_CAN is available since 2006.  
- 
-Another one, M_CAN supports the new CAN FD :-) since 2012. Some semiconductor manufacturers are starting to implement it (Spansion in 2014, ST, Freescale, ...? )  
- 
- 
- 
- 
  

QR Code
QR Code controllers:c_can (generated for current page)