Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
controllers:c_can [2012/04/04 23:08]
heinz created
controllers:c_can [2018/08/21 23:09] (current)
Line 1: Line 1:
-C_CAN is an CAN implementation developed by Bosch and sold as Intellectual Property IP to other chip manufactureres. http://www.can.bosch.com+ 
 +==== C_CAN / D_CAN / M_CAN ==== 
 + 
 +C_CAN is an CAN implementation developed by [[http://www.can.bosch.com | Bosch]] and sold as Intellectual Property IP to other chip manufactureres. [[http://www.bosch-semiconductors.de/en/ubk_semiconductors/safe/in_vehicle_communication/can_controllers/can_controllers.html | CAN products]].
  
 Known chips using it: Known chips using it:
  
   * ARM (in general) Bosch GmbH? offers the C_CAN module to be integrated via the AMBA(tm) APB interface protocol bus to an ARM processor.   * ARM (in general) Bosch GmbH? offers the C_CAN module to be integrated via the AMBA(tm) APB interface protocol bus to an ARM processor.
-  * Altera: Bosch C_CAN intellectual property (IP) module can be implemented on the Altera(r) Stratix(tm), Cyclone(tm), and APEX(tm) 20KE FPGA families. (Statement from: http://www.altera.com/products/ip/iup/can/m-bos-c_can.html) +  * Altera: Bosch C_CAN intellectual property (IP) module can be implemented on the Altera(r) Stratix(tm), Cyclone(tm), and APEX(tm) 20KE FPGA families. [[https://www.altera.com/solutions/partners/ip-partners/bosch.html | Bosch parner profile ]]. 
-  * Fujitsu 8FX/16LX/16FX/32FX+  * Fujitsu (now Spansion) 8FX/16LX/16FX/32FX, Spansion FCR4
   * Hynix ARM HMS30C7202   * Hynix ARM HMS30C7202
 +  * Nuvoton NUC130/NUC140
   * OKI stand alone CAN controller ML67Q2301   * OKI stand alone CAN controller ML67Q2301
   * SiLabs? C8051F040, C8051F500   * SiLabs? C8051F040, C8051F500
   * ST STR911    * ST STR911 
  
-A new module design, the D_CANis available since 2006. +A new module design, the D_CAN is available since 2006. 
  
-Another one, M_CAN supports the new CAN FD since 2012.+Another one, M_CAN supports the new CAN FD :-) since 2012. Some semiconductor manufacturers are starting to implement it (Spansion in 2014, ST, Freescale, Atmel, ...? ) 
  
  

QR Code
QR Code controllers:c_can (generated for current page)