Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
controllers:c_can [2014/06/21 12:11]
heinz enhanced
controllers:c_can [2018/08/21 23:09] (current)
Line 1: Line 1:
-C_CAN is an CAN implementation developed by Bosch and sold as Intellectual Property IP to other chip manufactureres. http://www.can.bosch.com+ 
 +==== C_CAN / D_CAN / M_CAN ==== 
 + 
 +C_CAN is an CAN implementation developed by [[http://www.can.bosch.com | Bosch]] and sold as Intellectual Property IP to other chip manufactureres. [[http://www.bosch-semiconductors.de/en/ubk_semiconductors/safe/in_vehicle_communication/can_controllers/can_controllers.html | CAN products]].
  
 Known chips using it: Known chips using it:
  
   * ARM (in general) Bosch GmbH? offers the C_CAN module to be integrated via the AMBA(tm) APB interface protocol bus to an ARM processor.   * ARM (in general) Bosch GmbH? offers the C_CAN module to be integrated via the AMBA(tm) APB interface protocol bus to an ARM processor.
-  * Altera: Bosch C_CAN intellectual property (IP) module can be implemented on the Altera(r) Stratix(tm), Cyclone(tm), and APEX(tm) 20KE FPGA families. (Statement from: http://www.altera.com/products/ip/iup/can/m-bos-c_can.html)+  * Altera: Bosch C_CAN intellectual property (IP) module can be implemented on the Altera(r) Stratix(tm), Cyclone(tm), and APEX(tm) 20KE FPGA families. [[https://www.altera.com/solutions/partners/ip-partners/bosch.html | Bosch parner profile ]].
   * Fujitsu (now Spansion) 8FX/16LX/16FX/32FX, Spansion FCR4   * Fujitsu (now Spansion) 8FX/16LX/16FX/32FX, Spansion FCR4
   * Hynix ARM HMS30C7202   * Hynix ARM HMS30C7202
Line 14: Line 17:
 A new module design, the D_CAN is available since 2006.  A new module design, the D_CAN is available since 2006. 
  
-Another one, M_CAN supports the new CAN FD :-) since 2012. Some semiconductor manufacturers are starting to implement it (Spansion in 2014, ST, Freescale, ...? ) +Another one, M_CAN supports the new CAN FD :-) since 2012. Some semiconductor manufacturers are starting to implement it (Spansion in 2014, ST, Freescale, Atmel, ...? ) 
  
  

QR Code
QR Code controllers:c_can (generated for current page)