Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
controllers:hms [2013/01/21 16:39] – created heinzcontrollers:hms [2018/08/21 23:09] (current) – external edit 127.0.0.1
Line 1: Line 1:
-====== HMS ======+===== HMS =====
  
 Try to put the latest devices on top of each section and mark end-of-line products. Only specify the main parameters of the micro controllers and go more into deep with details about the CAN interface. Always try to put a link to the data sheet or manual. Try to put the latest devices on top of each section and mark end-of-line products. Only specify the main parameters of the micro controllers and go more into deep with details about the CAN interface. Always try to put a link to the data sheet or manual.
  
 ===== SoC ===== ===== SoC =====
 +
 +Is it more a SOC or a standard Micro ?
 +
 +  * [[http://www.anybus.com/technologies/network_processors.shtml | AnyBus NP40(tm)]] network processor. Includes all major network protocols: CAN/CANopen/DeviceNet, Modbus, Profibus, Profinet, Ethernet/IP, EtherCAT, POWERLINK, Modbus-TCP, Bacnet/IP.\\ Based on a Cortex-M3 CPU and flexible FPGA array.
  
  

QR Code
QR Code controllers:hms (generated for current page)