| Both sides previous revisionPrevious revisionNext revision | Previous revisionLast revisionBoth sides next revision |
| controllers:microchip [2019/08/01 14:21] – [32 bit Controllers] heinz | controllers:microchip [2022/07/23 15:50] – [Stand alone CAN Controllers] MCP251863 heinz |
|---|
| ===== 8 bit Controllers ===== | ===== 8 bit Controllers ===== |
| |
| | * [[https://www.microchip.com/design-centers/8-bit/pic-mcus/device-selection/pic18-Q84-product-family | PIC18-Q84 Product Family]] of 8-bit microcontrollers combines an extensive array of Core Independent Peripherals (CIPs) with Controller Area Network Flexible Data Rate (CAN FD) for automotive interface and smart sensor networks. :-) |
| | • CAN FD features: – Functional in CAN FD or CAN 2.0B modes – One dedicated transmit FIFO – Three Programmable Transmit/Receive FIFOs – One Transmit Event Queue – 12 Acceptance Masks/Filters. |
| ===== 16 bit Controllers ===== | ===== 16 bit Controllers ===== |
| |
| * [[http://www.microchip.com/wwwproducts/Devices.aspx?product=MCP2515 | MCP2515]] [[http://ww1.microchip.com/downloads/en/DeviceDoc/21801G.pdf | PDF]] SPI/CAN. Three Transmit Buffers with Prioritization and Abort Feature. Two Receive Buffers. | * [[http://www.microchip.com/wwwproducts/Devices.aspx?product=MCP2515 | MCP2515]] [[http://ww1.microchip.com/downloads/en/DeviceDoc/21801G.pdf | PDF]] SPI/CAN. Three Transmit Buffers with Prioritization and Abort Feature. Two Receive Buffers. |
| * [[http://www.microchip.com/wwwproducts/Devices.aspx?product=MCP25625 | MCP25625]] [[http://ww1.microchip.com/downloads/en/DeviceDoc/20005282A.pdf | PDF]] SPI/CAN. CAN Controller with Integrated Transceiver. CAN controller works from 2.7 to 5.5 V, Transceiver needs 5 V. SPI speed max 10 Mbit/s. Three Transmit Buffers with Prioritization and Abort Feature. Two Receive Buffers. 6x6 QFN-28L | * [[http://www.microchip.com/wwwproducts/Devices.aspx?product=MCP25625 | MCP25625]] [[http://ww1.microchip.com/downloads/en/DeviceDoc/20005282A.pdf | PDF]] SPI/CAN. CAN Controller with Integrated Transceiver. CAN controller works from 2.7 to 5.5 V, Transceiver needs 5 V. SPI speed max 10 Mbit/s. Three Transmit Buffers with Prioritization and Abort Feature. Two Receive Buffers. 6x6 QFN-28L |
| * | * [[https://www.microchip.com/en-us/product/MCP2518FD | MCP2518FD]] :-) External CAN FD Controller with SPI Interface. Supports both CAN frames in the Classical format (CAN 2.0B) and CAN Flexible Data Rate (CAN FD) format as specified in ISO11898-1:2015. Arbitration Bit Rate up to 1 Mbps, Data Bit Rate up to 8 Mbps, Up to 17 MHz SPI Clock Speed. 31 FIFOs configurable as transmit or receive. -40°C to +150°C. Housing VDFN14, SOIC14. |
| | * [[https://www.microchip.com/en-us/product/MCP251863 | MCP251863]] :-) External CAN FD Controller with SPI Interface and CAN Transceiver (announced 2015). Cost-effective and small-footprint CAN FD controller (MCP2518FD) with an integrated Transceiver (ATA6563) that can easily be added to a microcontroller with an available SPI interface. \\ Supports both CAN frames in the Classical format (CAN2.0B) and CAN Flexible Data Rate (CAN FD) format, as specified in ISO 11898-1:2015. The integrated transceiver is a high-speed CAN transceiver compliant with the ISO 11898-2, ISO 11898-2: 2016, ISO 11898-5 and SAE J2962-2 CAN standards. It provides a very low current consumption in Standby mode and wake-up capability via the CAN bus. 28 pin SSOP housing. -40C to +150 °C. |
| |
| Microchip has [[http://can-newsletter.org/hardware/semiconductors/151002_can-fd-products-microchip-goes-automotive | announced]] a stand alone CAN FD controller with SPI host interface. The official product launch is planned for end of October 2015. | |
| ===== IO expander ===== | ===== IO expander ===== |
| |
