| Both sides previous revisionPrevious revisionNext revision | Previous revision |
| controllers:renesas [2016/01/25 17:18] – [32 bit Controllers] S7G2 heinz | controllers:renesas [2018/08/21 23:09] (current) – external edit 127.0.0.1 |
|---|
| |
| ===== 32 bit Controllers ===== | ===== 32 bit Controllers ===== |
| | |
| | |
| | ==== R-Car ==== |
| | Generation 2 |
| | * R-Car H2 |
| | * R-Car M2 |
| | * R-Car E2 |
| | Generation 3 |
| | * R-Car H3 2 x CAN/CANFD |
| | * R-Car M3 |
| |
| |
| |
| One member of the RH family will be the first containing the new CAN FD :-) module. | One member of the RH family will be the first containing the new CAN FD :-) module. |
| | |
| | * RH850/V1R-M 320-MHz RISC MCU, 2-MiB flash, 2-MiB RAM, on-chip DSP core, 6 x CAN FD (the Renesas RS-CANFD complies with the ISO 11898-1:2016), developed for automotive radar ADAS solutions. |
| |
| * [[http://am.renesas.com/products/mpumcu/rh850/rh850p1x/rh850p1m/index.jsp| RH850/P1M]] low power consumption, up to 2 MB flash and up to 128 KB RAM, enhanced motor control timer, up to three RS-CAN interfaces, digital interface for sensor such as SENT and PSI5, safety functions such as lockstep CPU, ECC, BIST (Built-in Self Test) and ECM (Error Control Module), suitable for chassis systems. | * [[http://am.renesas.com/products/mpumcu/rh850/rh850p1x/rh850p1m/index.jsp| RH850/P1M]] low power consumption, up to 2 MB flash and up to 128 KB RAM, enhanced motor control timer, up to three RS-CAN interfaces, digital interface for sensor such as SENT and PSI5, safety functions such as lockstep CPU, ECC, BIST (Built-in Self Test) and ECM (Error Control Module), suitable for chassis systems. |
| | |
| | * RH850/P1H-C (R7F701372) 2 or 3 ch. M_CAN + 1 x MTTCAN :-) |
| ==== RX family ==== | ==== RX family ==== |
| * [[http://www.renesas.eu/products/mpumcu/rx/rx200/index.jsp| RX200]] Low power 32 bit family, 32-bit RXv2 CPU core @54 MHz, 1.8 to 5.5V, incorporating functions for IEC60730 compliance, 32-bit single-precision floating point | * [[http://www.renesas.eu/products/mpumcu/rx/rx200/index.jsp| RX200]] Low power 32 bit family, 32-bit RXv2 CPU core @54 MHz, 1.8 to 5.5V, incorporating functions for IEC60730 compliance, 32-bit single-precision floating point |
| * [[ http://www.renesas.eu/products/mpumcu/rx/rx700/rx71m/index.jsp | RX71M]] Family of 32-bit micro controllers. up to 240 MHz, up to 4 MB of on-chip flash memory, 552 SRAM, 3 ch CAN, Common functions: 12-bit A/D: 29 ch (8 ch x 1 unit + 21 ch x 1 unit), SCI, SCIF, I2C, RSPI, QSPI, SDHI, MMC, SSI (serial sound interface) | * [[ http://www.renesas.eu/products/mpumcu/rx/rx700/rx71m/index.jsp | RX71M]] Family of 32-bit micro controllers. up to 240 MHz, up to 4 MB of on-chip flash memory, 552 SRAM, 3 ch CAN, Common functions: 12-bit A/D: 29 ch (8 ch x 1 unit + 21 ch x 1 unit), SCI, SCIF, I2C, RSPI, QSPI, SDHI, MMC, SSI (serial sound interface) |
| ==== R-IN family ==== | ==== R-IN family ==== |
| | * [[https://www.renesas.com/en-sg/products/factory-automation/ec-1.html | EC-1]] R-IN based SoC is intended for high-speed, high-precision control of slave applications that require higher CPU performance such as intelligent I/O modules equipped with EtherCAT communication functions. The SoC also comes with one CAN channel. |
| |
| * [[http://www.renesas.eu/press/news/2012/news20121126_s.jsp | R-IN32M3 ]] Series (Renesas Industrial Networking Engine). ARM Cortex-M3 32-bit RISC CPU + HW-RTOS (Hardware Real-Time OS) 100 MHz. 2 channels CAN. R-IN32M3-CL CC-Link IE field controller and R-IN32M3-EC EtherCAT slave controller. Suited to be used as CAN to EtherCAT or CAN to CC-Link gateway.\\ Renesas [[http://www.renesas.eu/applications/industrial_equipment/industrial_communications/r-in/index.jsp| R-IN application site]].\\ Each of the two CAN channels implements 64 message buffers. [[http://documentation.renesas.com/doc/products/assp/r18uz0007ej0300_rin32m3.pdf| R-IN32M3 Series User's Manual Peripheral Functions]](PDF) | * [[http://www.renesas.eu/press/news/2012/news20121126_s.jsp | R-IN32M3 ]] Series (Renesas Industrial Networking Engine). ARM Cortex-M3 32-bit RISC CPU + HW-RTOS (Hardware Real-Time OS) 100 MHz. 2 channels CAN. R-IN32M3-CL CC-Link IE field controller and R-IN32M3-EC EtherCAT slave controller. Suited to be used as CAN to EtherCAT or CAN to CC-Link gateway.\\ Renesas [[http://www.renesas.eu/applications/industrial_equipment/industrial_communications/r-in/index.jsp| R-IN application site]].\\ Each of the two CAN channels implements 64 message buffers. [[http://documentation.renesas.com/doc/products/assp/r18uz0007ej0300_rin32m3.pdf| R-IN32M3 Series User's Manual Peripheral Functions]](PDF) |
| |
| The module can be found on the Cortex-A9 based RZ family, and the RH family | The module can be found on the Cortex-A9 based RZ family, and the RH family |
| | |
| | ==== RS-CANFD ==== |
