no way to compare when less than two revisions
Differences
This shows you the differences between two versions of the page.
| Previous revision | |||
| — | controllers:silvaco [2018/08/21 23:09] (current) – external edit 127.0.0.1 | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | ====== Silvaco, Inc. ====== | ||
| + | [[ http:// | ||
| + | |||
| + | =====IP Cores===== | ||
| + | |||
| + | * [[ http:// | ||
| + | * Full implementation of CAN FD and CAN 2.0 B | ||
| + | * Standard/ | ||
| + | * Up to 8Mbit/s | ||
| + | * 0-64 bytes data length | ||
| + | * Compliant with ISO 11898-1 | ||
| + | * Flexible mailboxes configurable | ||
| + | * To store 0-8, 16, 32, or 64 data bytes | ||
| + | * As receive or transmit | ||
| + | * Individual Rx mask register per mailbox | ||
| + | * Full featured Rx FIFO, stores up to 6 frames | ||
| + | * Transmission abort capability | ||
| + | * Listen-only mode | ||
| + | * Loop-back mode supporting self-test operation | ||
| + | * Programmable transmission priority scheme | ||
| + | * Time stamp based on 16-bit free-running timer with an optional external time tick | ||
| + | * Low power modes with programmable wake-up on bus activity or matching with received frames (pretended networking) | ||
| + | * Transceiver delay compensation for CAN FD Tx at faster data rates | ||
| + | * Detection and correction of memory read (ECC) | ||
| + | * SystemVerilog integration testbench including a number of usage scenarios | ||
