Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision |
controllers:texas_instruments [2018/01/13 13:17] – [Mixed] link corrected heinz | controllers:texas_instruments [2018/10/04 23:28] – [64 bit Controllers] link to reference manual heinz |
---|
| |
* [[http://www.ti.com/ww/de/mcu/concerto/index.shtml|Concerto]] [[http://www.ti.com/lit/gpn/f28m35h52c|F28M3x (PDF)]], Dual-subsystem MCUs, ARM Cortex-M3™ core with C2000’s C28x core on to one device. Two CAN controllers (Bosch [[http://www.semiconductors.bosch.de/en/ipmodules/can/canipmodules/d_can/d_can.asp| D_CAN IP]]) are connected to the Cortex-M3 core. 32 message objects. Programmable FIFO mode for message objects. Automatic bus on after Bus-Off state by a programmable 32-bit timer. | * [[http://www.ti.com/ww/de/mcu/concerto/index.shtml|Concerto]] [[http://www.ti.com/lit/gpn/f28m35h52c|F28M3x (PDF)]], Dual-subsystem MCUs, ARM Cortex-M3™ core with C2000’s C28x core on to one device. Two CAN controllers (Bosch [[http://www.semiconductors.bosch.de/en/ipmodules/can/canipmodules/d_can/d_can.asp| D_CAN IP]]) are connected to the Cortex-M3 core. 32 message objects. Programmable FIFO mode for message objects. Automatic bus on after Bus-Off state by a programmable 32-bit timer. |
| |
| ===== 64 bit Controllers ===== |
| AM654 SoC TI AM654 “Keystone III” quad core Arm Cortex-A53 + dual lockstep Cortex-R5F processor. with dual dual CAN-FD using Bosch M_CAN. First information [[https://www.cnx-software.com/2018/10/04/texas-instruments-am654-64-bit-arm-processor/ | here]]. And a technical manual [[http://www.ti.com/lit/ug/spruid7a/spruid7a.pdf | PDF]]. |
| |
| |
| |
| |
| |
| |
===== DSPs ===== | ===== DSPs ===== |