Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision |
controllers:texas_instruments [2018/08/21 23:09] – external edit 127.0.0.1 | controllers:texas_instruments [2022/07/19 13:17] – [Stand alone CAN Controllers] heinz |
---|
| |
* [[http://www.ti.com/ww/de/mcu/concerto/index.shtml|Concerto]] [[http://www.ti.com/lit/gpn/f28m35h52c|F28M3x (PDF)]], Dual-subsystem MCUs, ARM Cortex-M3™ core with C2000’s C28x core on to one device. Two CAN controllers (Bosch [[http://www.semiconductors.bosch.de/en/ipmodules/can/canipmodules/d_can/d_can.asp| D_CAN IP]]) are connected to the Cortex-M3 core. 32 message objects. Programmable FIFO mode for message objects. Automatic bus on after Bus-Off state by a programmable 32-bit timer. | * [[http://www.ti.com/ww/de/mcu/concerto/index.shtml|Concerto]] [[http://www.ti.com/lit/gpn/f28m35h52c|F28M3x (PDF)]], Dual-subsystem MCUs, ARM Cortex-M3™ core with C2000’s C28x core on to one device. Two CAN controllers (Bosch [[http://www.semiconductors.bosch.de/en/ipmodules/can/canipmodules/d_can/d_can.asp| D_CAN IP]]) are connected to the Cortex-M3 core. 32 message objects. Programmable FIFO mode for message objects. Automatic bus on after Bus-Off state by a programmable 32-bit timer. |
| |
| ===== 64 bit Controllers ===== |
| AM654 SoC TI AM654 “Keystone III” quad core Arm Cortex-A53 + dual lockstep Cortex-R5F processor. with dual dual CAN-FD using Bosch M_CAN. First information [[https://www.cnx-software.com/2018/10/04/texas-instruments-am654-64-bit-arm-processor/ | here]]. And a technical manual [[http://www.ti.com/lit/ug/spruid7a/spruid7a.pdf | PDF]]. |
| |
| |
| |
| |
| |
| |
===== DSPs ===== | ===== DSPs ===== |
| |
| |
==== SoC Processors for Advanced Driver Assist Systems (ADAS) ==== | ===== SoC Processors for Advanced Driver Assist Systems (ADAS) ===== |
| |
| * [[ https://www.ti.com/product/DRA80M | DRA80M]] Jacinto™ Infotainment Applications Processor, up to quad Arm Cortex-A53 and integrated MCU with dual Arm Cortex-R5F for automotive gateway, 2× Modular Controller Area Network (MCAN) modules with full CAN-FD support :-) |
| * [[ https://www.ti.com/document-viewer/DRA829V/datasheet/device-overview-dev-overview#Dev_Overview| DRA829V]] - NEW - Gateway & vehicle compute application processor, Dual 64-bit Arm®Cortex®-A72 microprocessor subsystem at up to 2.0 GHz, 24K DMIPS, 14+2(ARM Cortex F5 Co) Modular Controller Area Network (MCAN) modules with full CAN-FD support :-) |
| * [[https://www.ti.com/product/DRA726/datasheet | DRA726-SPRS956H]] 1.5 GHz Arm Cortex-A15 with Graphics & DSP(C66x) for Infotainment & Cluster, 2 x DCAN |
| * [[https://www.ti.com/product/DRA746/datasheet | DRA746]] Dual 1.5 GHz Arm Cortex-A15 SoC processor with graphics & DSP(C66x) for automotive infotainment & cluster, 2 x DCAN |
* [[http://www.ti.com/product/tda2 | TDA2x]] ARM® Dual Cortex™-A15 Microprocessor, C66x™ Floating-Point VLIW DSP, ARM Cortex™-M4 Image Processor (IPU). Two DCAN modules. [[http://www.ti.com/lit/ds/symlink/tda2.pdf | TDA2x(PDF)]]. | * [[http://www.ti.com/product/tda2 | TDA2x]] ARM® Dual Cortex™-A15 Microprocessor, C66x™ Floating-Point VLIW DSP, ARM Cortex™-M4 Image Processor (IPU). Two DCAN modules. [[http://www.ti.com/lit/ds/symlink/tda2.pdf | TDA2x(PDF)]]. |
* [[http://www.ti.com/product/tda3 | TDA3x]] Up to two C66x Floating-Point VLIW DSP, and Dual ARM® Cortex®-M4 Image Processor (IPU). Two DCAN modules. [[http://www.ti.com/lit/ds/symlink/tda3.pdf | TDA3x(PDF)]]. | * [[http://www.ti.com/product/tda3 | TDA3x]] Up to two C66x Floating-Point VLIW DSP, and Dual ARM® Cortex®-M4 Image Processor (IPU). Two DCAN modules. [[http://www.ti.com/lit/ds/symlink/tda3.pdf | TDA3x(PDF)]]. |
===== Stand alone CAN Controllers ===== | ===== Stand alone CAN Controllers ===== |
| |
* [[http://www.ti.com/product/TCAN4550-Q1 | TCAN 4550]] stand-alone CAN FD protocol controller. On-chip is also a 5-Mbit/s qualified transceiver. common mode range is ±12 V; wake up via remote wake-up using Wake Up Pattern (WUP ISO 11898-2); [[http://www.aecouncil.com/AECDocuments.html | ACE Q100]]-qualified -40 °C to +125 °C. (av. since Jan. 2018) [[http://www.ti.com/lit/ds/symlink/tcan4550-q1.pdf | data sheet]] | * [[http://www.ti.com/product/TCAN4550-Q1 | TCAN 4550]] stand-alone CAN FD protocol controller. Automotive system basis chip (SBC) with integrated CAN FD controller & transceiver. On-chip is also a 5-Mbit/s qualified transceiver. common mode range is ±12 V; wake up via remote wake-up using Wake Up Pattern (WUP ISO 11898-2); [[http://www.aecouncil.com/AECDocuments.html | ACE Q100]]-qualified -40 °C to +125 °C. (av. since Jan. 2018) [[http://www.ti.com/lit/ds/symlink/tcan4550-q1.pdf | data sheet]] |
| |
| |
| ===== System Basic Chip ===== |
| * [[http://www.ti.com/product/TCAN4550-Q1 | TCAN4550-Q1]] Automotive-System Basis Chip (SBC), SPI interface with CAN FD :-) controller and transceiver up to 5 Mbit/s; Watchdog-Timer and Failsafe-Modi; integrated 125 mA-LDO (Low-Dropout-Linearregler), Wake-up mode; AEC Q100: qualified for automotive applications, Temperature grade 1: –40°C to 125°C; CAN FD controller supports both ISO 11898-1:2015 and Bosch M_CAN Revision 3.2.1.1 |