controllers:silvaco

Welcome to the CAN-bus Wiki project

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Silvaco, Inc. ======
[[ http://www.silvaco.com/company/profile/profile.html | Silvaco]]

=====IP Cores=====

  * [[ http://www.ip-extreme.com/IP/flexcan.shtml | FlexCAN]]\\ The FlexCAN core comes with a Verilog RTL source code, a test bench, and documentation. The transmit- and receive-mailboxes are configurable (0 to 8, 16, 32, or 64 byte). The receive FIFO is able to store up to 6 data frames. The time-stamping is based on a 16-bit free-running timer with an optional external time tick. The transmission of data frames can be aborted. The core features listen-only mode and CAN FD transmitter delay compensation. Additionally, it provides a detection and correction (ECC) of memory read.
    * Full implementation of CAN FD and CAN 2.0 B
      * Standard/extended data frames
      * Up to 8Mbit/s
      * 0-64 bytes data length
    * Compliant with ISO 11898-1
    * Flexible mailboxes configurable
      * To store 0-8, 16, 32, or 64 data bytes
      * As receive or transmit
    * Individual Rx mask register per mailbox
    * Full featured Rx FIFO, stores up to 6 frames
    * Transmission abort capability
    * Listen-only mode
    * Loop-back mode supporting self-test operation
    * Programmable transmission priority scheme
    * Time stamp based on 16-bit free-running timer with an optional external time tick
    * Low power modes with programmable wake-up on bus activity or matching with received frames (pretended networking)
    * Transceiver delay compensation for CAN FD Tx at faster data rates
    * Detection and correction of memory read (ECC)
    * SystemVerilog integration testbench including a number of usage scenarios

Trace: • spansion • flexcan • dcd • eds • octavo • certified_chips • nuvoton • holt

Navigation

Search

Toolbox

QR Code