Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Last revisionBoth sides next revision
controllers:certified_chips [2013/03/26 14:54] – link to layer-1 tets heinzcontrollers:certified_chips [2018/08/13 13:39] isensee
Line 1: Line 1:
-==== CAN controller certification ====+===== CAN controller certification =====
  
-For the testing philosophy of CAN chips  +The following standards are important for the certification of CAN(-FD) controllers: 
-see http://www.cs-group.de/attached/sae99pc349.PDF +  * ISO 11898-1: CAN  Data link layer and physical signaling for Classical CAN and CAN FD 
-This Paper is not anymore availableWho knows where to get it?+  * ISO 11898-4: TTCAN Time-triggered communication  
 +  * ISO 16845-1: CAN Conformance Test Plan, since Oct 2016 it covers Classical CAN and the CAN FD protocols.\\ An update regarding REC increment on CRC error is available at [[https://www.can-cia.org/fileadmin/resources/documents/cia_rec-increment-on-crc-error.pdf|CiA web site]].
  
-But there is another one by Wolfhard Lawrenz "''Conformance Test of In-Vehicle Communication Protocols - Why?''" +Test Lab [[http://www.cs-group.de/ | C&S group]] is testing compliance with 
-http://www.cs-group.de/uploads/media/CT_Concept_02.pdf+[[https://www.cs-group.de/testing/conformance-tests/can-osi-2/ | OSI Layer 2]]. The site also includes information on the CAN Processor Interface Tests, CAN Robustness Tests and specific C&S Add-on Tests.
  
 +Please visit [[https://www.cs-group.de/references/tested-products/can-osi-2-2/ | this]] for a table maintained by C&S for CAN Standalone Controller, Micro Controller and CAN-IPs.
  
-The following standards are importand: 
-  * ISO DIS 11898-1: CAN  Data link layer and physical signalling  
-  * ISO DIS 11898-2: CAN High Speed Physical Layer 
-  * ISO DIS 11898-3: CAN Low-speed, fault-tolerant, medium-dependent interface 
-  * ISO DIS 11898-4: TTCAN Time-triggered communication  
-  * ISO DIS 11898-5: CAN High-speed medium access unit with low-power mode  
-  * ISO DIS 16845 : CAN Conformance Test Plan 
-Test Lab http://www.cs-group.de/ C&S is testing compliance with 
-[[http://www.cs-group.de/conformance-test/can-osi-2.html| OSI Layer 2]]. 
 ---- ----
  
-^ Chip         ^ Manufacturer       ^ Test Lab          ^ +The lab also tests OSI layer 1 for High- and Low-Speed Transceivers.
-| SJA1000      |Philips         | .                 | +
-| PIC18FXX8    |Microchip       | C | +
-| C_CAN IP     |Bosch           | C&S | +
-| T89C51CC01   |Atmel           | C&S | +
-| T89C51CC02   |Atmel           | C&S | +
-| ATMega32M1   |Atmel           | C&S | +
-| BF534/536/537|Analog Devices  | C&S | +
-| MB96340      |Fujitsu         | ? | +
-| TMS320F2803x |Texas Instruments | ? | +
- +
-The table is not complete! +
-Please visit http://www.cs-group.de/index.php?id=125 for a table maintained by  +
-C&S for CAN Standalone Controller, Microcontroller and CAN-IPs. +
- +
----- +
- +
-The lab [[http://www.cs-group.de/conformance-test/can-osi-1.html | tests OSI layer 1 too]], for High- and Low-Speed Transceivers.+
 C&S maintains two tables for tested products  C&S maintains two tables for tested products 
  
-  * High-Speed transceivers http://www.cs-group.de/index.php?id=74 +  * [[https://www.cs-group.de/references/tested-products/can-osi-1-high-speed/ | High-Speed transceivers]] 
-  * Low-Speed transceivers http://www.cs-group.de/index.php?id=72 +  * [[https://www.cs-group.de/references/tested-products/can-osi-1-low-speed/ | Low-Speed transceivers]]
- +
- +
- +
  
 +The Germany based [[http://www.ihr.de/index.php?lang=en | IHR]] is another well-known test expert, which is going to provide a test tool compliant to ISO 16845-1.

QR Code
QR Code controllers:certified_chips (generated for current page)