Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
controllers:certified_chips [2013/03/26 12:31] – created heinzcontrollers:certified_chips [2018/08/21 23:09] (current) – external edit 127.0.0.1
Line 1: Line 1:
-==== CAN controller certification ====+===== CAN controller certification =====
  
-For the testing philosophy of CAN chips  +The following standards are important for the certification of CAN(-FD) controllers: 
-see http://www.cs-group.de/attached/sae99pc349.PDF +  * ISO 11898-1: CAN  Data link layer and physical signaling for Classical CAN and CAN FD 
-This Paper is not anymore availableWho knows where to get it?+  * ISO 11898-4: TTCAN Time-triggered communication  
 +  * ISO 16845-1: CAN Conformance Test Plan, since Oct 2016 it covers Classical CAN and the CAN FD protocols.\\ An update regarding REC increment on CRC error is available at [[https://www.can-cia.org/fileadmin/resources/documents/cia_rec-increment-on-crc-error.pdf|CiA web site]].
  
-But there is another one by Wolfhard Lawrenz "''Conformance Test of In-Vehicle Communication Protocols - Why?''" +Test Lab [[http://www.cs-group.de/ | C&S group]] is testing compliance with 
-http://www.cs-group.de/uploads/media/CT_Concept_02.pdf+[[https://www.cs-group.de/testing/conformance-tests/can-osi-2/ | OSI Layer 2]]. The site also includes information on the CAN Processor Interface Tests, CAN Robustness Tests and specific C&S Add-on Tests.
  
 +Please visit [[https://www.cs-group.de/references/tested-products/can-osi-2-2/ | this]] for a table maintained by C&S for CAN Standalone Controller, Micro Controller and CAN-IPs.
  
-The following standards are importand: 
-  * ISO DIS 11898-1: CAN  Data link layer and physical signalling  
-  * ISO DIS 11898-2: CAN High Speed Physical Layer 
-  * ISO DIS 11898-3: CAN Low-speed, fault-tolerant, medium-dependent interface 
-  * ISO DIS 11898-4: TTCAN Time-triggered communication  
-  * ISO DIS 11898-5: CAN High-speed medium access unit with low-power mode  
-  * ISO DIS 16845 : CAN Conformance Test Plan 
-Test Lab http://www.cs-group.de/ C&S is testing compliance with 
-[[http://www.cs-group.de/conformance-test/can-osi-2.html| OSI Layer 2]]. 
 ---- ----
  
-^ Chip         ^ Manufacturer       ^ Test Lab          ^ +The lab also tests OSI layer 1 for High- and Low-Speed Transceivers.
-| SJA1000      |Philips         | .                 | +
-| PIC18FXX8    |Microchip       | C | +
-| C_CAN IP     |Bosch           | C&S | +
-| T89C51CC01   |Atmel           | C&S | +
-| T89C51CC02   |Atmel           | C&S | +
-| ATMega32M1   |Atmel           | C&S | +
-| BF534/536/537|Analog Devices  | C&S | +
-| MB96340      |Fujitsu         | ? | +
-| TMS320F2803x |Texas Instruments | ? | +
- +
-The table is not complete! +
-Please visit http://www.cs-group.de/index.php?id=125 for a table maintained by  +
-C&S for CAN Standalone Controller, Microcontroller and CAN-IPs. +
- +
----- +
- +
-The lab tests OSI layer 1 too, for High- and Low-Speed Transceivers.+
 C&S maintains two tables for tested products  C&S maintains two tables for tested products 
  
-High-Speed transceivers http://www.cs-group.de/index.php?id=74 +  * [[https://www.cs-group.de/references/tested-products/can-osi-1-high-speed/ | High-Speed transceivers]] 
- +  * [[https://www.cs-group.de/references/tested-products/can-osi-1-low-speed/ | Low-Speed transceivers]]
-Low-Speed transceivers http://www.cs-group.de/index.php?id=72 +
- +
- +
- +
  
 +The Germany based [[http://www.ihr.de/index.php?lang=en | IHR]] is another well-known test expert, which is going to provide a test tool compliant to ISO 16845-1.

QR Code
QR Code controllers:certified_chips (generated for current page)